#! /bin/sh

# Guess values for system-dependent variables and create Makefiles.
# Generated automatically using autoconf version 2.13 
# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
#
# This configure script is free software; the Free Software Foundation
# gives unlimited permission to copy, distribute and modify it.

# Defaults:
ac_help=
ac_default_prefix=/usr/local
# Any additions from configure.in:
ac_help="$ac_help
  --enable-maintainer-mode enable make rules and dependencies not useful
                          (and sometimes confusing) to the casual installer"
ac_help="$ac_help
  --enable-shared[=PKGS]  build shared libraries [default=yes]"
ac_help="$ac_help
  --enable-static[=PKGS]  build static libraries [default=yes]"
ac_help="$ac_help
  --enable-fast-install[=PKGS]  optimize for fast installation [default=yes]"
ac_help="$ac_help
  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]"
ac_help="$ac_help
  --disable-libtool-lock  avoid locking (might break parallel builds)"
ac_help="$ac_help
  --with-socks            Build with socks support"
ac_help="$ac_help
  --with-textui           Build text frontend"
ac_help="$ac_help
  --with-bot              Build irssi-bot"
ac_help="$ac_help
  --with-proxy            Build irssi-proxy"
ac_help="$ac_help
  --with-terminfo         Use terminfo directly instead of curses"
ac_help="$ac_help
  --with-modules          Specify what modules to build in binary"
ac_help="$ac_help
  --with-perl-staticlib   Specify that we want to link perl libraries
                        statically in irssi, default is no"
ac_help="$ac_help
  --with-perl-lib=[site|vendor|DIR]  Specify where to install the
                        Perl libraries for irssi, default is site"
ac_help="$ac_help
  --with-perl[=yes|no|module]  Build with Perl support - also specifies
                        if it should be built into main irssi binary
                        (static, default) or as module"
ac_help="$ac_help
  --with-tests           Run all the tests"
ac_help="$ac_help
  --enable-ipv6           Enable IPv6 support"
ac_help="$ac_help
  --with-glib-prefix=PFX   Prefix where GLIB is installed (optional)"
ac_help="$ac_help
  --with-glib-exec-prefix=PFX Exec prefix where GLIB is installed (optional)"
ac_help="$ac_help
  --disable-glibtest       Do not try to compile and run a test GLIB program"
ac_help="$ac_help
  --with-glib-prefix=PFX   Prefix where GLIB is installed (optional)"
ac_help="$ac_help
  --with-glib-exec-prefix=PFX Exec prefix where GLIB is installed (optional)"
ac_help="$ac_help
  --disable-glibtest       Do not try to compile and run a test GLIB program"
ac_help="$ac_help
  --with-sco              Use this to turn on SCO-specific code"
ac_help="$ac_help
  --with-sunos-curses     Used to force SunOS 4.x curses"
ac_help="$ac_help
  --with-osf1-curses      Used to force OSF/1 curses"
ac_help="$ac_help
  --with-vcurses[=incdir] Used to force SysV curses"
ac_help="$ac_help
  --with-ncurses[=dir]    Compile with ncurses/locate base dir"

# Initialize some variables set by options.
# The variables have the same names as the options, with
# dashes changed to underlines.
build=NONE
cache_file=./config.cache
exec_prefix=NONE
host=NONE
no_create=
nonopt=NONE
no_recursion=
prefix=NONE
program_prefix=NONE
program_suffix=NONE
program_transform_name=s,x,x,
silent=
site=
srcdir=
target=NONE
verbose=
x_includes=NONE
x_libraries=NONE
bindir='${exec_prefix}/bin'
sbindir='${exec_prefix}/sbin'
libexecdir='${exec_prefix}/libexec'
datadir='${prefix}/share'
sysconfdir='${prefix}/etc'
sharedstatedir='${prefix}/com'
localstatedir='${prefix}/var'
libdir='${exec_prefix}/lib'
includedir='${prefix}/include'
oldincludedir='/usr/include'
infodir='${prefix}/info'
mandir='${prefix}/man'

# Initialize some other variables.
subdirs=
MFLAGS= MAKEFLAGS=
SHELL=${CONFIG_SHELL-/bin/sh}
# Maximum number of lines to put in a shell here document.
ac_max_here_lines=12

ac_prev=
for ac_option
do

  # If the previous option needs an argument, assign it.
  if test -n "$ac_prev"; then
    eval "$ac_prev=\$ac_option"
    ac_prev=
    continue
  fi

  case "$ac_option" in
  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
  *) ac_optarg= ;;
  esac

  # Accept the important Cygnus configure options, so we can diagnose typos.

  case "$ac_option" in

  -bindir | --bindir | --bindi | --bind | --bin | --bi)
    ac_prev=bindir ;;
  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
    bindir="$ac_optarg" ;;

  -build | --build | --buil | --bui | --bu)
    ac_prev=build ;;
  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
    build="$ac_optarg" ;;

  -cache-file | --cache-file | --cache-fil | --cache-fi \
  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
    ac_prev=cache_file ;;
  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
    cache_file="$ac_optarg" ;;

  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
    ac_prev=datadir ;;
  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
  | --da=*)
    datadir="$ac_optarg" ;;

  -disable-* | --disable-*)
    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
    # Reject names that are not valid shell variable names.
    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
    fi
    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
    eval "enable_${ac_feature}=no" ;;

  -enable-* | --enable-*)
    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
    # Reject names that are not valid shell variable names.
    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
    fi
    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
    case "$ac_option" in
      *=*) ;;
      *) ac_optarg=yes ;;
    esac
    eval "enable_${ac_feature}='$ac_optarg'" ;;

  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
  | --exec | --exe | --ex)
    ac_prev=exec_prefix ;;
  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
  | --exec=* | --exe=* | --ex=*)
    exec_prefix="$ac_optarg" ;;

  -gas | --gas | --ga | --g)
    # Obsolete; use --with-gas.
    with_gas=yes ;;

  -help | --help | --hel | --he)
    # Omit some internal or obsolete options to make the list less imposing.
    # This message is too long to be a string in the A/UX 3.1 sh.
    cat << EOF
Usage: configure [options] [host]
Options: [defaults in brackets after descriptions]
Configuration:
  --cache-file=FILE       cache test results in FILE
  --help                  print this message
  --no-create             do not create output files
  --quiet, --silent       do not print \`checking...' messages
  --version               print the version of autoconf that created configure
Directory and file names:
  --prefix=PREFIX         install architecture-independent files in PREFIX
                          [$ac_default_prefix]
  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
                          [same as prefix]
  --bindir=DIR            user executables in DIR [EPREFIX/bin]
  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
  --datadir=DIR           read-only architecture-independent data in DIR
                          [PREFIX/share]
  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
                          [PREFIX/com]
  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
  --includedir=DIR        C header files in DIR [PREFIX/include]
  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
  --infodir=DIR           info documentation in DIR [PREFIX/info]
  --mandir=DIR            man documentation in DIR [PREFIX/man]
  --srcdir=DIR            find the sources in DIR [configure dir or ..]
  --program-prefix=PREFIX prepend PREFIX to installed program names
  --program-suffix=SUFFIX append SUFFIX to installed program names
  --program-transform-name=PROGRAM
                          run sed PROGRAM on installed program names
EOF
    cat << EOF
Host type:
  --build=BUILD           configure for building on BUILD [BUILD=HOST]
  --host=HOST             configure for HOST [guessed]
  --target=TARGET         configure for TARGET [TARGET=HOST]
Features and packages:
  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
  --x-includes=DIR        X include files are in DIR
  --x-libraries=DIR       X library files are in DIR
EOF
    if test -n "$ac_help"; then
      echo "--enable and --with options recognized:$ac_help"
    fi
    exit 0 ;;

  -host | --host | --hos | --ho)
    ac_prev=host ;;
  -host=* | --host=* | --hos=* | --ho=*)
    host="$ac_optarg" ;;

  -includedir | --includedir | --includedi | --included | --include \
  | --includ | --inclu | --incl | --inc)
    ac_prev=includedir ;;
  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
  | --includ=* | --inclu=* | --incl=* | --inc=*)
    includedir="$ac_optarg" ;;

  -infodir | --infodir | --infodi | --infod | --info | --inf)
    ac_prev=infodir ;;
  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
    infodir="$ac_optarg" ;;

  -libdir | --libdir | --libdi | --libd)
    ac_prev=libdir ;;
  -libdir=* | --libdir=* | --libdi=* | --libd=*)
    libdir="$ac_optarg" ;;

  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
  | --libexe | --libex | --libe)
    ac_prev=libexecdir ;;
  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
  | --libexe=* | --libex=* | --libe=*)
    libexecdir="$ac_optarg" ;;

  -localstatedir | --localstatedir | --localstatedi | --localstated \
  | --localstate | --localstat | --localsta | --localst \
  | --locals | --local | --loca | --loc | --lo)
    ac_prev=localstatedir ;;
  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
    localstatedir="$ac_optarg" ;;

  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
    ac_prev=mandir ;;
  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
    mandir="$ac_optarg" ;;

  -nfp | --nfp | --nf)
    # Obsolete; use --without-fp.
    with_fp=no ;;

  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
  | --no-cr | --no-c)
    no_create=yes ;;

  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
    no_recursion=yes ;;

  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
  | --oldin | --oldi | --old | --ol | --o)
    ac_prev=oldincludedir ;;
  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
    oldincludedir="$ac_optarg" ;;

  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
    ac_prev=prefix ;;
  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
    prefix="$ac_optarg" ;;

  -program-prefix | --program-prefix | --program-prefi | --program-pref \
  | --program-pre | --program-pr | --program-p)
    ac_prev=program_prefix ;;
  -program-prefix=* | --program-prefix=* | --program-prefi=* \
  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
    program_prefix="$ac_optarg" ;;

  -program-suffix | --program-suffix | --program-suffi | --program-suff \
  | --program-suf | --program-su | --program-s)
    ac_prev=program_suffix ;;
  -program-suffix=* | --program-suffix=* | --program-suffi=* \
  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
    program_suffix="$ac_optarg" ;;

  -program-transform-name | --program-transform-name \
  | --program-transform-nam | --program-transform-na \
  | --program-transform-n | --program-transform- \
  | --program-transform | --program-transfor \
  | --program-transfo | --program-transf \
  | --program-trans | --program-tran \
  | --progr-tra | --program-tr | --program-t)
    ac_prev=program_transform_name ;;
  -program-transform-name=* | --program-transform-name=* \
  | --program-transform-nam=* | --program-transform-na=* \
  | --program-transform-n=* | --program-transform-=* \
  | --program-transform=* | --program-transfor=* \
  | --program-transfo=* | --program-transf=* \
  | --program-trans=* | --program-tran=* \
  | --progr-tra=* | --program-tr=* | --program-t=*)
    program_transform_name="$ac_optarg" ;;

  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
  | -silent | --silent | --silen | --sile | --sil)
    silent=yes ;;

  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
    ac_prev=sbindir ;;
  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
  | --sbi=* | --sb=*)
    sbindir="$ac_optarg" ;;

  -sharedstatedir | --sharedstatedir | --sharedstatedi \
  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
  | --sharedst | --shareds | --shared | --share | --shar \
  | --sha | --sh)
    ac_prev=sharedstatedir ;;
  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
  | --sha=* | --sh=*)
    sharedstatedir="$ac_optarg" ;;

  -site | --site | --sit)
    ac_prev=site ;;
  -site=* | --site=* | --sit=*)
    site="$ac_optarg" ;;

  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
    ac_prev=srcdir ;;
  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
    srcdir="$ac_optarg" ;;

  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
  | --syscon | --sysco | --sysc | --sys | --sy)
    ac_prev=sysconfdir ;;
  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
    sysconfdir="$ac_optarg" ;;

  -target | --target | --targe | --targ | --tar | --ta | --t)
    ac_prev=target ;;
  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
    target="$ac_optarg" ;;

  -v | -verbose | --verbose | --verbos | --verbo | --verb)
    verbose=yes ;;

  -version | --version | --versio | --versi | --vers)
    echo "configure generated by autoconf version 2.13"
    exit 0 ;;

  -with-* | --with-*)
    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
    # Reject names that are not valid shell variable names.
    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
    fi
    ac_package=`echo $ac_package| sed 's/-/_/g'`
    case "$ac_option" in
      *=*) ;;
      *) ac_optarg=yes ;;
    esac
    eval "with_${ac_package}='$ac_optarg'" ;;

  -without-* | --without-*)
    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
    # Reject names that are not valid shell variable names.
    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
    fi
    ac_package=`echo $ac_package| sed 's/-/_/g'`
    eval "with_${ac_package}=no" ;;

  --x)
    # Obsolete; use --with-x.
    with_x=yes ;;

  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
  | --x-incl | --x-inc | --x-in | --x-i)
    ac_prev=x_includes ;;
  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
    x_includes="$ac_optarg" ;;

  -x-libraries | --x-libraries | --x-librarie | --x-librari \
  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
    ac_prev=x_libraries ;;
  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
    x_libraries="$ac_optarg" ;;

  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
    ;;

  *)
    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
      echo "configure: warning: $ac_option: invalid host type" 1>&2
    fi
    if test "x$nonopt" != xNONE; then
      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
    fi
    nonopt="$ac_option"
    ;;

  esac
done

if test -n "$ac_prev"; then
  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
fi

trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15

# File descriptor usage:
# 0 standard input
# 1 file creation
# 2 errors and warnings
# 3 some systems may open it to /dev/tty
# 4 used on the Kubota Titan
# 6 checking for... messages and results
# 5 compiler messages saved in config.log
if test "$silent" = yes; then
  exec 6>/dev/null
else
  exec 6>&1
fi
exec 5>./config.log

echo "\
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
" 1>&5

# Strip out --no-create and --no-recursion so they do not pile up.
# Also quote any args containing shell metacharacters.
ac_configure_args=
for ac_arg
do
  case "$ac_arg" in
  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
  | --no-cr | --no-c) ;;
  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
  esac
done

# NLS nuisances.
# Only set these to C if already set.  These must not be set unconditionally
# because not all systems understand e.g. LANG=C (notably SCO).
# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
# Non-C LC_CTYPE values break the ctype check.
if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi

# confdefs.h avoids OS command line length limits that DEFS can exceed.
rm -rf conftest* confdefs.h
# AIX cpp loses on an empty file, so make sure it contains at least a newline.
echo > confdefs.h

# A filename unique to this package, relative to the directory that
# configure is in, which we can look for to find out if srcdir is correct.
ac_unique_file=src

# Find the source files, if location was not specified.
if test -z "$srcdir"; then
  ac_srcdir_defaulted=yes
  # Try the directory containing this script, then its parent.
  ac_prog=$0
  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
  srcdir=$ac_confdir
  if test ! -r $srcdir/$ac_unique_file; then
    srcdir=..
  fi
else
  ac_srcdir_defaulted=no
fi
if test ! -r $srcdir/$ac_unique_file; then
  if test "$ac_srcdir_defaulted" = yes; then
    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
  else
    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
  fi
fi
srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`

# Prefer explicitly selected file to automatically selected ones.
if test -z "$CONFIG_SITE"; then
  if test "x$prefix" != xNONE; then
    CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
  else
    CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
  fi
fi
for ac_site_file in $CONFIG_SITE; do
  if test -r "$ac_site_file"; then
    echo "loading site script $ac_site_file"
    . "$ac_site_file"
  fi
done

if test -r "$cache_file"; then
  echo "loading cache $cache_file"
  . $cache_file
else
  echo "creating cache $cache_file"
  > $cache_file
fi

ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross

ac_exeext=
ac_objext=o
if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
    ac_n= ac_c='
' ac_t='	'
  else
    ac_n=-n ac_c= ac_t=
  fi
else
  ac_n= ac_c='\c' ac_t=
fi



# we don't want VERSION in our config.h
if test -n "`grep '^#undef VERSION' config.h.in`"; then
  grep -v '^#undef VERSION' config.h.in > config.h.in.temp
  mv -f config.h.in.temp config.h.in
fi




ac_aux_dir=
for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
  if test -f $ac_dir/install-sh; then
    ac_aux_dir=$ac_dir
    ac_install_sh="$ac_aux_dir/install-sh -c"
    break
  elif test -f $ac_dir/install.sh; then
    ac_aux_dir=$ac_dir
    ac_install_sh="$ac_aux_dir/install.sh -c"
    break
  fi
done
if test -z "$ac_aux_dir"; then
  { echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; }
fi
ac_config_guess=$ac_aux_dir/config.guess
ac_config_sub=$ac_aux_dir/config.sub
ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.

# Find a good install program.  We prefer a C program (faster),
# so one script is as good as another.  But avoid the broken or
# incompatible versions:
# SysV /etc/install, /usr/sbin/install
# SunOS /usr/etc/install
# IRIX /sbin/install
# AIX /bin/install
# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
# AFS /usr/afsws/bin/install, which mishandles nonexistent args
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
echo "configure:627: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
  for ac_dir in $PATH; do
    # Account for people who put trailing slashes in PATH elements.
    case "$ac_dir/" in
    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
    *)
      # OSF1 and SCO ODT 3.0 have their own names for install.
      # Don't use installbsd from OSF since it installs stuff as root
      # by default.
      for ac_prog in ginstall scoinst install; do
        if test -f $ac_dir/$ac_prog; then
	  if test $ac_prog = install &&
            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
	    # AIX install.  It has an incompatible calling convention.
	    :
	  else
	    ac_cv_path_install="$ac_dir/$ac_prog -c"
	    break 2
	  fi
	fi
      done
      ;;
    esac
  done
  IFS="$ac_save_IFS"

fi
  if test "${ac_cv_path_install+set}" = set; then
    INSTALL="$ac_cv_path_install"
  else
    # As a last resort, use the slow shell script.  We don't cache a
    # path for INSTALL within a source directory, because that will
    # break other packages using the cache if that directory is
    # removed, or if the path is relative.
    INSTALL="$ac_install_sh"
  fi
fi
echo "$ac_t""$INSTALL" 1>&6

# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
# It thinks the first close brace ends the variable substitution.
test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'

test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'

test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'

echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
echo "configure:680: checking whether build environment is sane" >&5
# Just in case
sleep 1
echo timestamp > conftestfile
# Do `set' in a subshell so we don't clobber the current shell's
# arguments.  Must try -L first in case configure is actually a
# symlink; some systems play weird games with the mod time of symlinks
# (eg FreeBSD returns the mod time of the symlink's containing
# directory).
if (
   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
   if test "$*" = "X"; then
      # -L didn't work.
      set X `ls -t $srcdir/configure conftestfile`
   fi
   if test "$*" != "X $srcdir/configure conftestfile" \
      && test "$*" != "X conftestfile $srcdir/configure"; then

      # If neither matched, then we have a broken ls.  This can happen
      # if, for instance, CONFIG_SHELL is bash and it inherits a
      # broken ls alias from the environment.  This has actually
      # happened.  Such a system could not be considered "sane".
      { echo "configure: error: ls -t appears to fail.  Make sure there is not a broken
alias in your environment" 1>&2; exit 1; }
   fi

   test "$2" = conftestfile
   )
then
   # Ok.
   :
else
   { echo "configure: error: newly created file is older than distributed files!
Check your system clock" 1>&2; exit 1; }
fi
rm -f conftest*
echo "$ac_t""yes" 1>&6
if test "$program_transform_name" = s,x,x,; then
  program_transform_name=
else
  # Double any \ or $.  echo might interpret backslashes.
  cat <<\EOF_SED > conftestsed
s,\\,\\\\,g; s,\$,$$,g
EOF_SED
  program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
  rm -f conftestsed
fi
test "$program_prefix" != NONE &&
  program_transform_name="s,^,${program_prefix},; $program_transform_name"
# Use a double $ so make ignores it.
test "$program_suffix" != NONE &&
  program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"

# sed with no file args requires a program.
test "$program_transform_name" = "" && program_transform_name="s,x,x,"

echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
echo "configure:737: checking whether ${MAKE-make} sets \${MAKE}" >&5
set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftestmake <<\EOF
all:
	@echo 'ac_maketemp="${MAKE}"'
EOF
# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
if test -n "$ac_maketemp"; then
  eval ac_cv_prog_make_${ac_make}_set=yes
else
  eval ac_cv_prog_make_${ac_make}_set=no
fi
rm -f conftestmake
fi
if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  SET_MAKE=
else
  echo "$ac_t""no" 1>&6
  SET_MAKE="MAKE=${MAKE-make}"
fi


PACKAGE=irssi

VERSION=0.8.4

if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
  { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
fi
cat >> confdefs.h <<EOF
#define PACKAGE "$PACKAGE"
EOF

cat >> confdefs.h <<EOF
#define VERSION "$VERSION"
EOF



missing_dir=`cd $ac_aux_dir && pwd`
echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
echo "configure:783: checking for working aclocal" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf.  Sigh.
if (aclocal --version) < /dev/null > /dev/null 2>&1; then
   ACLOCAL=aclocal
   echo "$ac_t""found" 1>&6
else
   ACLOCAL="$missing_dir/missing aclocal"
   echo "$ac_t""missing" 1>&6
fi

echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
echo "configure:796: checking for working autoconf" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf.  Sigh.
if (autoconf --version) < /dev/null > /dev/null 2>&1; then
   AUTOCONF=autoconf
   echo "$ac_t""found" 1>&6
else
   AUTOCONF="$missing_dir/missing autoconf"
   echo "$ac_t""missing" 1>&6
fi

echo $ac_n "checking for working automake""... $ac_c" 1>&6
echo "configure:809: checking for working automake" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf.  Sigh.
if (automake --version) < /dev/null > /dev/null 2>&1; then
   AUTOMAKE=automake
   echo "$ac_t""found" 1>&6
else
   AUTOMAKE="$missing_dir/missing automake"
   echo "$ac_t""missing" 1>&6
fi

echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
echo "configure:822: checking for working autoheader" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf.  Sigh.
if (autoheader --version) < /dev/null > /dev/null 2>&1; then
   AUTOHEADER=autoheader
   echo "$ac_t""found" 1>&6
else
   AUTOHEADER="$missing_dir/missing autoheader"
   echo "$ac_t""missing" 1>&6
fi

echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
echo "configure:835: checking for working makeinfo" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf.  Sigh.
if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
   MAKEINFO=makeinfo
   echo "$ac_t""found" 1>&6
else
   MAKEINFO="$missing_dir/missing makeinfo"
   echo "$ac_t""missing" 1>&6
fi



echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
echo "configure:850: checking whether to enable maintainer-specific portions of Makefiles" >&5
    # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
if test "${enable_maintainer_mode+set}" = set; then
  enableval="$enable_maintainer_mode"
  USE_MAINTAINER_MODE=$enableval
else
  USE_MAINTAINER_MODE=no
fi

  echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6
  

if test $USE_MAINTAINER_MODE = yes; then
  MAINTAINER_MODE_TRUE=
  MAINTAINER_MODE_FALSE='#'
else
  MAINTAINER_MODE_TRUE='#'
  MAINTAINER_MODE_FALSE=
fi
  MAINT=$MAINTAINER_MODE_TRUE
  



        echo $ac_n "checking for strerror in -lcposix""... $ac_c" 1>&6
echo "configure:875: checking for strerror in -lcposix" >&5
ac_lib_var=`echo cposix'_'strerror | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lcposix  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 883 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char strerror();

int main() {
strerror()
; return 0; }
EOF
if { (eval echo configure:894: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  LIBS="$LIBS -lcposix"
else
  echo "$ac_t""no" 1>&6
fi

  

# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:919: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -n "$CC"; then
  ac_cv_prog_CC="$CC" # Let the user override the test.
else
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_prog_CC="gcc"
      break
    fi
  done
  IFS="$ac_save_ifs"
fi
fi
CC="$ac_cv_prog_CC"
if test -n "$CC"; then
  echo "$ac_t""$CC" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

if test -z "$CC"; then
  # Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:949: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -n "$CC"; then
  ac_cv_prog_CC="$CC" # Let the user override the test.
else
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_prog_rejected=no
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
        ac_prog_rejected=yes
	continue
      fi
      ac_cv_prog_CC="cc"
      break
    fi
  done
  IFS="$ac_save_ifs"
if test $ac_prog_rejected = yes; then
  # We found a bogon in the path, so make sure we never use it.
  set dummy $ac_cv_prog_CC
  shift
  if test $# -gt 0; then
    # We chose a different compiler from the bogus one.
    # However, it has the same basename, so the bogon will be chosen
    # first if we set CC to just the basename; use the full file name.
    shift
    set dummy "$ac_dir/$ac_word" "$@"
    shift
    ac_cv_prog_CC="$@"
  fi
fi
fi
fi
CC="$ac_cv_prog_CC"
if test -n "$CC"; then
  echo "$ac_t""$CC" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

  if test -z "$CC"; then
    case "`uname -s`" in
    *win32* | *WIN32*)
      # Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1000: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -n "$CC"; then
  ac_cv_prog_CC="$CC" # Let the user override the test.
else
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_prog_CC="cl"
      break
    fi
  done
  IFS="$ac_save_ifs"
fi
fi
CC="$ac_cv_prog_CC"
if test -n "$CC"; then
  echo "$ac_t""$CC" 1>&6
else
  echo "$ac_t""no" 1>&6
fi
 ;;
    esac
  fi
  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
fi

echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
echo "configure:1032: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5

ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross

cat > conftest.$ac_ext << EOF

#line 1043 "configure"
#include "confdefs.h"

main(){return(0);}
EOF
if { (eval echo configure:1048: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  ac_cv_prog_cc_works=yes
  # If we can't run a trivial program, we are probably using a cross compiler.
  if (./conftest; exit) 2>/dev/null; then
    ac_cv_prog_cc_cross=no
  else
    ac_cv_prog_cc_cross=yes
  fi
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  ac_cv_prog_cc_works=no
fi
rm -fr conftest*
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross

echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
if test $ac_cv_prog_cc_works = no; then
  { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
echo "configure:1074: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross

echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
echo "configure:1079: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.c <<EOF
#ifdef __GNUC__
  yes;
#endif
EOF
if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1088: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
  ac_cv_prog_gcc=yes
else
  ac_cv_prog_gcc=no
fi
fi

echo "$ac_t""$ac_cv_prog_gcc" 1>&6

if test $ac_cv_prog_gcc = yes; then
  GCC=yes
else
  GCC=
fi

ac_test_CFLAGS="${CFLAGS+set}"
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
echo "configure:1107: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  echo 'void f(){}' > conftest.c
if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
  ac_cv_prog_cc_g=yes
else
  ac_cv_prog_cc_g=no
fi
rm -f conftest*

fi

echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
if test "$ac_test_CFLAGS" = set; then
  CFLAGS="$ac_save_CFLAGS"
elif test $ac_cv_prog_cc_g = yes; then
  if test "$GCC" = yes; then
    CFLAGS="-g -O2"
  else
    CFLAGS="-g"
  fi
else
  if test "$GCC" = yes; then
    CFLAGS="-O2"
  else
    CFLAGS=
  fi
fi

echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
echo "configure:1139: checking how to run the C preprocessor" >&5
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
  CPP=
fi
if test -z "$CPP"; then
if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
    # This must be in double quotes, not single quotes, because CPP may get
  # substituted into the Makefile and "${CC-cc}" will confuse make.
  CPP="${CC-cc} -E"
  # On the NeXT, cc -E runs the code through the compiler's parser,
  # not just through cpp.
  cat > conftest.$ac_ext <<EOF
#line 1154 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:1160: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  :
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  CPP="${CC-cc} -E -traditional-cpp"
  cat > conftest.$ac_ext <<EOF
#line 1171 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:1177: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  :
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  CPP="${CC-cc} -nologo -E"
  cat > conftest.$ac_ext <<EOF
#line 1188 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:1194: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  :
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  CPP=/lib/cpp
fi
rm -f conftest*
fi
rm -f conftest*
fi
rm -f conftest*
  ac_cv_prog_CPP="$CPP"
fi
  CPP="$ac_cv_prog_CPP"
else
  ac_cv_prog_CPP="$CPP"
fi
echo "$ac_t""$CPP" 1>&6

echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
echo "configure:1219: checking for ANSI C header files" >&5
if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 1224 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <stdarg.h>
#include <string.h>
#include <float.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:1232: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  rm -rf conftest*
  ac_cv_header_stdc=yes
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  ac_cv_header_stdc=no
fi
rm -f conftest*

if test $ac_cv_header_stdc = yes; then
  # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
#line 1249 "configure"
#include "confdefs.h"
#include <string.h>
EOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
  egrep "memchr" >/dev/null 2>&1; then
  :
else
  rm -rf conftest*
  ac_cv_header_stdc=no
fi
rm -f conftest*

fi

if test $ac_cv_header_stdc = yes; then
  # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
#line 1267 "configure"
#include "confdefs.h"
#include <stdlib.h>
EOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
  egrep "free" >/dev/null 2>&1; then
  :
else
  rm -rf conftest*
  ac_cv_header_stdc=no
fi
rm -f conftest*

fi

if test $ac_cv_header_stdc = yes; then
  # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
if test "$cross_compiling" = yes; then
  :
else
  cat > conftest.$ac_ext <<EOF
#line 1288 "configure"
#include "confdefs.h"
#include <ctype.h>
#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
#define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
int main () { int i; for (i = 0; i < 256; i++)
if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2);
exit (0); }

EOF
if { (eval echo configure:1299: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  :
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  ac_cv_header_stdc=no
fi
rm -fr conftest*
fi

fi
fi

echo "$ac_t""$ac_cv_header_stdc" 1>&6
if test $ac_cv_header_stdc = yes; then
  cat >> confdefs.h <<\EOF
#define STDC_HEADERS 1
EOF

fi

if test "$program_transform_name" = s,x,x,; then
  program_transform_name=
else
  # Double any \ or $.  echo might interpret backslashes.
  cat <<\EOF_SED > conftestsed
s,\\,\\\\,g; s,\$,$$,g
EOF_SED
  program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
  rm -f conftestsed
fi
test "$program_prefix" != NONE &&
  program_transform_name="s,^,${program_prefix},; $program_transform_name"
# Use a double $ so make ignores it.
test "$program_suffix" != NONE &&
  program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"

# sed with no file args requires a program.
test "$program_transform_name" = "" && program_transform_name="s,x,x,"

# Check whether --enable-shared or --disable-shared was given.
if test "${enable_shared+set}" = set; then
  enableval="$enable_shared"
  p=${PACKAGE-default}
case "$enableval" in
yes) enable_shared=yes ;;
no) enable_shared=no ;;
*)
  enable_shared=no
  # Look at the argument we got.  We use all the common list separators.
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
  for pkg in $enableval; do
    if test "X$pkg" = "X$p"; then
      enable_shared=yes
    fi
  done
  IFS="$ac_save_ifs"
  ;;
esac
else
  enable_shared=yes
fi

# Check whether --enable-static or --disable-static was given.
if test "${enable_static+set}" = set; then
  enableval="$enable_static"
  p=${PACKAGE-default}
case "$enableval" in
yes) enable_static=yes ;;
no) enable_static=no ;;
*)
  enable_static=no
  # Look at the argument we got.  We use all the common list separators.
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
  for pkg in $enableval; do
    if test "X$pkg" = "X$p"; then
      enable_static=yes
    fi
  done
  IFS="$ac_save_ifs"
  ;;
esac
else
  enable_static=yes
fi

# Check whether --enable-fast-install or --disable-fast-install was given.
if test "${enable_fast_install+set}" = set; then
  enableval="$enable_fast_install"
  p=${PACKAGE-default}
case "$enableval" in
yes) enable_fast_install=yes ;;
no) enable_fast_install=no ;;
*)
  enable_fast_install=no
  # Look at the argument we got.  We use all the common list separators.
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
  for pkg in $enableval; do
    if test "X$pkg" = "X$p"; then
      enable_fast_install=yes
    fi
  done
  IFS="$ac_save_ifs"
  ;;
esac
else
  enable_fast_install=yes
fi


# Make sure we can run config.sub.
if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
fi

echo $ac_n "checking host system type""... $ac_c" 1>&6
echo "configure:1417: checking host system type" >&5

host_alias=$host
case "$host_alias" in
NONE)
  case $nonopt in
  NONE)
    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
    fi ;;
  *) host_alias=$nonopt ;;
  esac ;;
esac

host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
echo "$ac_t""$host" 1>&6

echo $ac_n "checking build system type""... $ac_c" 1>&6
echo "configure:1438: checking build system type" >&5

build_alias=$build
case "$build_alias" in
NONE)
  case $nonopt in
  NONE) build_alias=$host_alias ;;
  *) build_alias=$nonopt ;;
  esac ;;
esac

build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
echo "$ac_t""$build" 1>&6

# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1458: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -n "$RANLIB"; then
  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
else
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_prog_RANLIB="ranlib"
      break
    fi
  done
  IFS="$ac_save_ifs"
  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
fi
fi
RANLIB="$ac_cv_prog_RANLIB"
if test -n "$RANLIB"; then
  echo "$ac_t""$RANLIB" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

# Check whether --with-gnu-ld or --without-gnu-ld was given.
if test "${with_gnu_ld+set}" = set; then
  withval="$with_gnu_ld"
  test "$withval" = no || with_gnu_ld=yes
else
  with_gnu_ld=no
fi

ac_prog=ld
if test "$ac_cv_prog_gcc" = yes; then
  # Check if gcc -print-prog-name=ld gives a path.
  echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
echo "configure:1497: checking for ld used by GCC" >&5
  ac_prog=`($CC -print-prog-name=ld) 2>&5`
  case "$ac_prog" in
    # Accept absolute paths.
    [\\/]* | [A-Za-z]:[\\/]*)
      re_direlt='/[^/][^/]*/\.\./'
      # Canonicalize the path of ld
      ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
	ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
      done
      test -z "$LD" && LD="$ac_prog"
      ;;
  "")
    # If it fails, then pretend we aren't using GCC.
    ac_prog=ld
    ;;
  *)
    # If it is relative, then search for the first ld in PATH.
    with_gnu_ld=unknown
    ;;
  esac
elif test "$with_gnu_ld" = yes; then
  echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
echo "configure:1521: checking for GNU ld" >&5
else
  echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
echo "configure:1524: checking for non-GNU ld" >&5
fi
if eval "test \"`echo '$''{'ac_cv_path_LD'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -z "$LD"; then
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
  for ac_dir in $PATH; do
    test -z "$ac_dir" && ac_dir=.
    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
      ac_cv_path_LD="$ac_dir/$ac_prog"
      # Check to see if the program is GNU ld.  I'd rather use --version,
      # but apparently some GNU ld's only accept -v.
      # Break only if it was the GNU/non-GNU ld that we prefer.
      if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
	test "$with_gnu_ld" != no && break
      else
	test "$with_gnu_ld" != yes && break
      fi
    fi
  done
  IFS="$ac_save_ifs"
else
  ac_cv_path_LD="$LD" # Let the user override the test with a path.
fi
fi

LD="$ac_cv_path_LD"
if test -n "$LD"; then
  echo "$ac_t""$LD" 1>&6
else
  echo "$ac_t""no" 1>&6
fi
test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
echo "configure:1559: checking if the linker ($LD) is GNU ld" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gnu_ld'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  # I'd rather use --version here, but apparently some GNU ld's only accept -v.
if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
  ac_cv_prog_gnu_ld=yes
else
  ac_cv_prog_gnu_ld=no
fi
fi

echo "$ac_t""$ac_cv_prog_gnu_ld" 1>&6


echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
echo "configure:1575: checking for BSD-compatible nm" >&5
if eval "test \"`echo '$''{'ac_cv_path_NM'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -n "$NM"; then
  # Let the user override the test.
  ac_cv_path_NM="$NM"
else
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
  for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then
      # Check to see if the nm accepts a BSD-compat flag.
      # Adding the `sed 1q' prevents false positives on HP-UX, which says:
      #   nm: unknown option "B" ignored
      if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
	ac_cv_path_NM="$ac_dir/nm -B"
	break
      elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
	ac_cv_path_NM="$ac_dir/nm -p"
	break
      else
	ac_cv_path_NM=${ac_cv_path_NM="$ac_dir/nm"} # keep the first match, but
	continue # so that we can try to find one that supports BSD flags
      fi
    fi
  done
  IFS="$ac_save_ifs"
  test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm
fi
fi

NM="$ac_cv_path_NM"
echo "$ac_t""$NM" 1>&6

echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
echo "configure:1611: checking whether ln -s works" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  rm -f conftestdata
if ln -s X conftestdata 2>/dev/null
then
  rm -f conftestdata
  ac_cv_prog_LN_S="ln -s"
else
  ac_cv_prog_LN_S=ln
fi
fi
LN_S="$ac_cv_prog_LN_S"
if test "$ac_cv_prog_LN_S" = "ln -s"; then
  echo "$ac_t""yes" 1>&6
else
  echo "$ac_t""no" 1>&6
fi


case "$target" in
NONE) lt_target="$host" ;;
*) lt_target="$target" ;;
esac

# Check for any special flags to pass to ltconfig.
libtool_flags="--cache-file=$cache_file"
test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"


# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
if test "${enable_libtool_lock+set}" = set; then
  enableval="$enable_libtool_lock"
  :
fi

test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"

# Some flags need to be propagated to the compiler or linker for good
# libtool support.
case "$lt_target" in
*-*-irix6*)
  # Find out which ABI we are using.
  echo '#line 1660 "configure"' > conftest.$ac_ext
  if { (eval echo configure:1661: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
    case "`/usr/bin/file conftest.o`" in
    *32-bit*)
      LD="${LD-ld} -32"
      ;;
    *N32*)
      LD="${LD-ld} -n32"
      ;;
    *64-bit*)
      LD="${LD-ld} -64"
      ;;
    esac
  fi
  rm -rf conftest*
  ;;

*-*-sco3.2v5*)
  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
  SAVE_CFLAGS="$CFLAGS"
  CFLAGS="$CFLAGS -belf"
  echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
echo "configure:1682: checking whether the C compiler needs -belf" >&5
if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 1687 "configure"
#include "confdefs.h"

int main() {

; return 0; }
EOF
if { (eval echo configure:1694: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  lt_cv_cc_needs_belf=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  lt_cv_cc_needs_belf=no
fi
rm -f conftest*
fi

echo "$ac_t""$lt_cv_cc_needs_belf" 1>&6
  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
    CFLAGS="$SAVE_CFLAGS"
  fi
  ;;


esac


# Save cache, so that ltconfig can load it
cat > confcache <<\EOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
# scripts and configure runs.  It is not useful on other systems.
# If it contains results you don't want to keep, you may remove or edit it.
#
# By default, configure uses ./config.cache as the cache file,
# creating it if it does not exist already.  You can give configure
# the --cache-file=FILE option to use a different cache file; that is
# what configure does when it calls configure scripts in
# subdirectories, so they share the cache.
# Giving --cache-file=/dev/null disables caching, for debugging configure.
# config.status only pays attention to the cache file if you give it the
# --recheck option to rerun configure.
#
EOF
# The following way of writing the cache mishandles newlines in values,
# but we know of no workaround that is simple, portable, and efficient.
# So, don't put newlines in cache variables' values.
# Ultrix sh set writes to stderr and can't be redirected directly,
# and sets the high bit in the cache file unless we assign to the vars.
(set) 2>&1 |
  case `(ac_space=' '; set | grep ac_space) 2>&1` in
  *ac_space=\ *)
    # `set' does not quote correctly, so add quotes (double-quote substitution
    # turns \\\\ into \\, and sed turns \\ into \).
    sed -n \
      -e "s/'/'\\\\''/g" \
      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
    ;;
  *)
    # `set' quotes correctly as required by POSIX, so do not add quotes.
    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
    ;;
  esac >> confcache
if cmp -s $cache_file confcache; then
  :
else
  if test -w $cache_file; then
    echo "updating cache $cache_file"
    cat confcache > $cache_file
  else
    echo "not updating unwritable cache $cache_file"
  fi
fi
rm -f confcache


# Actually configure libtool.  ac_aux_dir is where install-sh is found.
CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \
|| { echo "configure: error: libtool configure failed" 1>&2; exit 1; }

# Reload cache, that may have been modified by ltconfig
if test -r "$cache_file"; then
  echo "loading cache $cache_file"
  . $cache_file
else
  echo "creating cache $cache_file"
  > $cache_file
fi


# This can be used to rebuild libtool when needed
LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh"

# Always use our own libtool.
LIBTOOL='$(SHELL) $(top_builddir)/libtool'

# Redirect the config.log output again, so that the ltconfig log is not
# clobbered by the next message.
exec 5>>./config.log


# Extract the first word of "sed", so it can be a program name with args.
set dummy sed; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1799: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_sedpath'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  case "$sedpath" in
  /*)
  ac_cv_path_sedpath="$sedpath" # Let the user override the test with a path.
  ;;
  ?:/*)			 
  ac_cv_path_sedpath="$sedpath" # Let the user override the test with a dos path.
  ;;
  *)
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do 
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_path_sedpath="$ac_dir/$ac_word"
      break
    fi
  done
  IFS="$ac_save_ifs"
  ;;
esac
fi
sedpath="$ac_cv_path_sedpath"
if test -n "$sedpath"; then
  echo "$ac_t""$sedpath" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

# Extract the first word of "perl", so it can be a program name with args.
set dummy perl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1834: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_perlpath'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  case "$perlpath" in
  /*)
  ac_cv_path_perlpath="$perlpath" # Let the user override the test with a path.
  ;;
  ?:/*)			 
  ac_cv_path_perlpath="$perlpath" # Let the user override the test with a dos path.
  ;;
  *)
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do 
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_path_perlpath="$ac_dir/$ac_word"
      break
    fi
  done
  IFS="$ac_save_ifs"
  ;;
esac
fi
perlpath="$ac_cv_path_perlpath"
if test -n "$perlpath"; then
  echo "$ac_t""$perlpath" 1>&6
else
  echo "$ac_t""no" 1>&6
fi


if test "x$enable_static" = "xno"; then
	{ echo "configure: error: Don't give --disable-static option to configure" 1>&2; exit 1; }
fi

for ac_hdr in string.h stdlib.h unistd.h dirent.h sys/ioctl.h sys/resource.h
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
echo "configure:1875: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 1880 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:1885: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=yes"
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=no"
fi
rm -f conftest*
fi
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
  cat >> confdefs.h <<EOF
#define $ac_tr_hdr 1
EOF
 
else
  echo "$ac_t""no" 1>&6
fi
done


# check posix headers..
for ac_hdr in sys/time.h sys/utsname.h regex.h
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
echo "configure:1917: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 1922 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:1927: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=yes"
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=no"
fi
rm -f conftest*
fi
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
  cat >> confdefs.h <<EOF
#define $ac_tr_hdr 1
EOF
 
else
  echo "$ac_t""no" 1>&6
fi
done


# Check whether --with-socks or --without-socks was given.
if test "${with_socks+set}" = set; then
  withval="$with_socks"
  if test x$withval = xyes; then
		want_socks=yes
	else
		if test "x$withval" = xno; then
			want_socks=no
		else
			want_socks=yes
		fi
	fi
else
  want_socks=no
fi


# Check whether --with-textui or --without-textui was given.
if test "${with_textui+set}" = set; then
  withval="$with_textui"
  if test x$withval = xyes; then
		want_textui=yes
	else
		if test "x$withval" = xno; then
			want_textui=no
		else
			want_textui=yes
		fi
	fi
else
  want_textui=yes
fi


# Check whether --with-bot or --without-bot was given.
if test "${with_bot+set}" = set; then
  withval="$with_bot"
  if test x$withval = xyes; then
		want_irssibot=yes
	else
		if test "x$withval" = xno; then
			want_irssibot=no
		else
			want_irssibot=yes
		fi
	fi
else
  want_irssibot=no
fi


# Check whether --with-proxy or --without-proxy was given.
if test "${with_proxy+set}" = set; then
  withval="$with_proxy"
  if test x$withval = xyes; then
		want_irssiproxy=yes
	else
		if test "x$withval" = xno; then
			want_irssiproxy=no
		else
			want_irssiproxy=yes
		fi
	fi
else
  want_irssiproxy=no
fi


# Check whether --with-terminfo or --without-terminfo was given.
if test "${with_terminfo+set}" = set; then
  withval="$with_terminfo"
  if test x$withval = xyes; then
		want_terminfo=yes
	else
		if test "x$withval" = xno; then
			want_terminfo=no
		else
			want_terminfo=yes
		fi
	fi
else
  want_terminfo=yes
fi


# Check whether --with-modules or --without-modules was given.
if test "${with_modules+set}" = set; then
  withval="$with_modules"
  if test x$withval != xyes -a x$withval != xno; then
		build_modules="$withval"
	fi
fi


if test "x$prefix" != "xNONE"; then
        prefix=`eval echo $prefix`
	PERL_MM_PARAMS="INSTALLDIRS=perl PREFIX=$prefix"
	perl_library_dir="PERL_USE_LIB"
	perl_set_use_lib=yes

	perl_prefix_note=yes
fi

# Check whether --with-perl-staticlib or --without-perl-staticlib was given.
if test "${with_perl_staticlib+set}" = set; then
  withval="$with_perl_staticlib"
  if test x$withval = xyes; then
		want_staticperllib=yes
	else
		if test "x$withval" = xno; then
			want_staticperllib=no
		else
			want_staticperllib=yes
		fi
	fi
else
  want_staticperllib=no
fi



# Check whether --with-perl-lib or --without-perl-lib was given.
if test "${with_perl_lib+set}" = set; then
  withval="$with_perl_lib"
  if test "x$withval" = xyes; then
		want_perl=yes
	elif test "x$withval" = xno; then
		want_perl=no
	elif test "x$withval" = xsite; then
		want_perl=yes
		perl_prefix_note=no
		PERL_MM_PARAMS=""
	elif test "x$withval" = xvendor; then
		want_perl=yes
		perl_prefix_note=no
		if test -z "`$perlpath -v|grep '5\.0'`"; then
			PERL_MM_PARAMS="INSTALLDIRS=vendor"
		else
			PERL_MM_PARAMS="INSTALLDIRS=perl PREFIX=`perl -e 'use Config; print $Config{prefix}'`"
		fi
		perl_library_dir="(vendor default - `$perlpath -e 'use Config; print $Config{archlib}'`)"
	else
		want_perl=yes
		perl_prefix_note=no
		PERL_MM_PARAMS="INSTALLDIRS=perl LIB=$withval"
		perl_library_dir="PERL_USE_LIB"
		perl_set_use_lib=yes
	fi
else
  want_perl=yes
fi


# Check whether --with-perl or --without-perl was given.
if test "${with_perl+set}" = set; then
  withval="$with_perl"
  if test x$withval = xyes; then
		want_perl=static
	elif test x$withval = xstatic; then
		want_perl=static
	elif test x$withval = xmodule; then
		want_perl=module
	else
		want_perl=no
	fi
else
  want_perl=static
fi


# Check whether --with-tests or --without-tests was given.
if test "${with_tests+set}" = set; then
  withval="$with_tests"
  if test x$withval != xno; then
		TEST_DIR=test
	fi
else
  TEST_DIR=
fi



# Check whether --enable-ipv6 or --disable-ipv6 was given.
if test "${enable_ipv6+set}" = set; then
  enableval="$enable_ipv6"
  if test x$enableval = xyes; then
		want_ipv6=yes
	else
		if test "x$enableval" = xno; then
			want_ipv6=no
		else
			want_ipv6=yes
		fi
	fi
else
  want_ipv6=no
fi



case "$host_os" in
  hpux*)
    CFLAGS="$CFLAGS -D_XOPEN_SOURCE_EXTENDED"
    ;;
  *)
    ;;
esac


for ac_func in mkfifo fcntl nl_langinfo
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:2166: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 2171 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char $ac_func(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char $ac_func();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
$ac_func();
#endif

; return 0; }
EOF
if { (eval echo configure:2194: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
  cat >> confdefs.h <<EOF
#define $ac_tr_func 1
EOF
 
else
  echo "$ac_t""no" 1>&6
fi
done


echo $ac_n "checking for socket""... $ac_c" 1>&6
echo "configure:2220: checking for socket" >&5
if eval "test \"`echo '$''{'ac_cv_func_socket'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 2225 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char socket(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char socket();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_socket) || defined (__stub___socket)
choke me
#else
socket();
#endif

; return 0; }
EOF
if { (eval echo configure:2248: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_socket=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_socket=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'socket`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  :
else
  echo "$ac_t""no" 1>&6

	echo $ac_n "checking for socket in -lsocket""... $ac_c" 1>&6
echo "configure:2267: checking for socket in -lsocket" >&5
ac_lib_var=`echo socket'_'socket | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lsocket  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 2275 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char socket();

int main() {
socket()
; return 0; }
EOF
if { (eval echo configure:2286: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  
		LIBS="$LIBS -lsocket"
	
else
  echo "$ac_t""no" 1>&6
fi


fi


echo $ac_n "checking for inet_addr""... $ac_c" 1>&6
echo "configure:2313: checking for inet_addr" >&5
if eval "test \"`echo '$''{'ac_cv_func_inet_addr'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 2318 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char inet_addr(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char inet_addr();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_inet_addr) || defined (__stub___inet_addr)
choke me
#else
inet_addr();
#endif

; return 0; }
EOF
if { (eval echo configure:2341: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_inet_addr=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_inet_addr=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'inet_addr`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  :
else
  echo "$ac_t""no" 1>&6

	echo $ac_n "checking for inet_addr in -lnsl""... $ac_c" 1>&6
echo "configure:2360: checking for inet_addr in -lnsl" >&5
ac_lib_var=`echo nsl'_'inet_addr | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lnsl  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 2368 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char inet_addr();

int main() {
inet_addr()
; return 0; }
EOF
if { (eval echo configure:2379: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  
		LIBS="$LIBS -lnsl"
	
else
  echo "$ac_t""no" 1>&6
-lsocket
fi


fi


if test "x$ac_cv_prog_gcc" = "xyes"; then
  CFLAGS="$CFLAGS -Wall"
fi

echo $ac_n "checking for socklen_t""... $ac_c" 1>&6
echo "configure:2411: checking for socklen_t" >&5
if eval "test \"`echo '$''{'irssi_cv_type_socklen_t'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 2416 "configure"
#include "confdefs.h"

#include <sys/types.h>
#include <sys/socket.h>
int main() {
socklen_t t;
; return 0; }
EOF
if { (eval echo configure:2425: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  irssi_cv_type_socklen_t=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  irssi_cv_type_socklen_t=no
fi
rm -f conftest*
fi

if test $irssi_cv_type_socklen_t = no; then
cat >> confdefs.h <<\EOF
#define socklen_t int
EOF

fi
echo "$ac_t""$irssi_cv_type_socklen_t" 1>&6


if test "x$want_socks" = "xyes"; then
	echo $ac_n "checking for connect in -lsocks""... $ac_c" 1>&6
echo "configure:2448: checking for connect in -lsocks" >&5
ac_lib_var=`echo socks'_'connect | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lsocks  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 2456 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char connect();

int main() {
connect()
; return 0; }
EOF
if { (eval echo configure:2467: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  
		LIBS="$LIBS -lsocks"
		ac_safe=`echo "socks.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for socks.h""... $ac_c" 1>&6
echo "configure:2486: checking for socks.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 2491 "configure"
#include "confdefs.h"
#include <socks.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:2496: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=yes"
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=no"
fi
rm -f conftest*
fi
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  
			cat >> confdefs.h <<\EOF
#define HAVE_SOCKS_H 1
EOF

			CFLAGS="$CFLAGS -DSOCKS"
			echo "$ac_t"""socks5 library found, building with it"" 1>&6
		
else
  echo "$ac_t""no" 1>&6

			echo "$ac_t"""socks4 library found, building with it"" 1>&6
			CFLAGS="$CFLAGS -Dconnect=Rconnect -Dgetsockname=Rgetsockname -Dgetpeername=Rgetpeername -Dbind=Rbind -Daccept=Raccept -Dlisten=Rlisten -Dselect=Rselect"
		
fi

	
else
  echo "$ac_t""no" 1>&6
fi

fi





  echo $ac_n "checking whether GLib is unpacked to irssi dir""... $ac_c" 1>&6
echo "configure:2540: checking whether GLib is unpacked to irssi dir" >&5

  GLIB_DIR=`for d in *; do test -f $d/glib.h && echo $d; done`
  if test -n "$GLIB_DIR"; then
        echo "$ac_t""yes, using it" 1>&6

        if test ! -f $GLIB_DIR/.libs/libglib.a; then
      echo
      echo "configuring GLib ..."
      echo
      cd $GLIB_DIR
      if test ! -f glib-config; then
        ./configure
      fi
      ${MAKE-make}
      cd ..
      echo
    fi

    GLIB_LDEXTRA=`$GLIB_DIR/glib-config --libs gmodule|$sedpath -e 's/-lglib//' -e 's/-lgmodule//' -e 's,-L/usr/local/lib ,,'|$sedpath 's/ \+/ /g'`
    full_glib_dir="`pwd`/$GLIB_DIR"
    GLIB_CFLAGS="-I$full_glib_dir -I$full_glib_dir/gmodule"
    if test -f $full_glib_dir/.libs/libglib.a; then
      GLIB_LIBS="$full_glib_dir/.libs/libglib.a $GLIB_LDEXTRA"
      if test -f $full_glib_dir/gmodule/.libs/libgmodule.a; then
	GLIB_LIBS="$GLIB_LIBS $full_glib_dir/gmodule/.libs/libgmodule.a"
        cat >> confdefs.h <<\EOF
#define HAVE_GMODULE 1
EOF

	have_gmodule=yes
      fi
    else
      GLIB_LIBS="$full_glib_dir/libglib.a $GLIB_LDEXTRA"
      if test -f $full_glib_dir/gmodule/libgmodule.a; then
	GLIB_LIBS="$GLIB_LIBS $full_glib_dir/gmodule/libgmodule.a"
        cat >> confdefs.h <<\EOF
#define HAVE_GMODULE 1
EOF

	have_gmodule=yes
      fi
    fi
    
    
  else
    echo "$ac_t""no" 1>&6
  fi


if test -z "$GLIB_DIR"; then
  # Check whether --with-glib-prefix or --without-glib-prefix was given.
if test "${with_glib_prefix+set}" = set; then
  withval="$with_glib_prefix"
  glib_config_prefix="$withval"
else
  glib_config_prefix=""
fi

# Check whether --with-glib-exec-prefix or --without-glib-exec-prefix was given.
if test "${with_glib_exec_prefix+set}" = set; then
  withval="$with_glib_exec_prefix"
  glib_config_exec_prefix="$withval"
else
  glib_config_exec_prefix=""
fi

# Check whether --enable-glibtest or --disable-glibtest was given.
if test "${enable_glibtest+set}" = set; then
  enableval="$enable_glibtest"
  :
else
  enable_glibtest=yes
fi


  if test x$glib_config_exec_prefix != x ; then
     glib_config_args="$glib_config_args --exec-prefix=$glib_config_exec_prefix"
     if test x${GLIB_CONFIG+set} != xset ; then
        GLIB_CONFIG=$glib_config_exec_prefix/bin/glib-config
     fi
  fi
  if test x$glib_config_prefix != x ; then
     glib_config_args="$glib_config_args --prefix=$glib_config_prefix"
     if test x${GLIB_CONFIG+set} != xset ; then
        GLIB_CONFIG=$glib_config_prefix/bin/glib-config
     fi
  fi

  for module in . gmodule
  do
      case "$module" in
         gmodule) 
             glib_config_args="$glib_config_args gmodule"
         ;;
         gthread) 
             glib_config_args="$glib_config_args gthread"
         ;;
      esac
  done

  # Extract the first word of "glib-config", so it can be a program name with args.
set dummy glib-config; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:2644: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GLIB_CONFIG'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  case "$GLIB_CONFIG" in
  /*)
  ac_cv_path_GLIB_CONFIG="$GLIB_CONFIG" # Let the user override the test with a path.
  ;;
  ?:/*)			 
  ac_cv_path_GLIB_CONFIG="$GLIB_CONFIG" # Let the user override the test with a dos path.
  ;;
  *)
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do 
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_path_GLIB_CONFIG="$ac_dir/$ac_word"
      break
    fi
  done
  IFS="$ac_save_ifs"
  test -z "$ac_cv_path_GLIB_CONFIG" && ac_cv_path_GLIB_CONFIG="no"
  ;;
esac
fi
GLIB_CONFIG="$ac_cv_path_GLIB_CONFIG"
if test -n "$GLIB_CONFIG"; then
  echo "$ac_t""$GLIB_CONFIG" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

  min_glib_version=1.2.0
  echo $ac_n "checking for GLIB - version >= $min_glib_version""... $ac_c" 1>&6
echo "configure:2679: checking for GLIB - version >= $min_glib_version" >&5
  no_glib=""
  if test "$GLIB_CONFIG" = "no" ; then
    no_glib=yes
  else
    GLIB_CFLAGS=`$GLIB_CONFIG $glib_config_args --cflags`
    GLIB_LIBS=`$GLIB_CONFIG $glib_config_args --libs`
    glib_config_major_version=`$GLIB_CONFIG $glib_config_args --version | \
           sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\1/'`
    glib_config_minor_version=`$GLIB_CONFIG $glib_config_args --version | \
           sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\2/'`
    glib_config_micro_version=`$GLIB_CONFIG $glib_config_args --version | \
           sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\3/'`
    if test "x$enable_glibtest" = "xyes" ; then
      ac_save_CFLAGS="$CFLAGS"
      ac_save_LIBS="$LIBS"
      CFLAGS="$CFLAGS $GLIB_CFLAGS"
      LIBS="$GLIB_LIBS $LIBS"
      rm -f conf.glibtest
      if test "$cross_compiling" = yes; then
  echo $ac_n "cross compiling; assumed OK... $ac_c"
else
  cat > conftest.$ac_ext <<EOF
#line 2702 "configure"
#include "confdefs.h"

#include <glib.h>
#include <stdio.h>
#include <stdlib.h>

int 
main ()
{
  int major, minor, micro;
  char *tmp_version;

  system ("touch conf.glibtest");

  /* HP/UX 9 (%@#!) writes to sscanf strings */
  tmp_version = g_strdup("$min_glib_version");
  if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, &micro) != 3) {
     printf("%s, bad version string\n", "$min_glib_version");
     exit(1);
   }

  if ((glib_major_version != $glib_config_major_version) ||
      (glib_minor_version != $glib_config_minor_version) ||
      (glib_micro_version != $glib_config_micro_version))
    {
      printf("\n*** 'glib-config --version' returned %d.%d.%d, but GLIB (%d.%d.%d)\n", 
             $glib_config_major_version, $glib_config_minor_version, $glib_config_micro_version,
             glib_major_version, glib_minor_version, glib_micro_version);
      printf ("*** was found! If glib-config was correct, then it is best\n");
      printf ("*** to remove the old version of GLIB. You may also be able to fix the error\n");
      printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n");
      printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n");
      printf("*** required on your system.\n");
      printf("*** If glib-config was wrong, set the environment variable GLIB_CONFIG\n");
      printf("*** to point to the correct copy of glib-config, and remove the file config.cache\n");
      printf("*** before re-running configure\n");
    } 
  else if ((glib_major_version != GLIB_MAJOR_VERSION) ||
	   (glib_minor_version != GLIB_MINOR_VERSION) ||
           (glib_micro_version != GLIB_MICRO_VERSION))
    {
      printf("*** GLIB header files (version %d.%d.%d) do not match\n",
	     GLIB_MAJOR_VERSION, GLIB_MINOR_VERSION, GLIB_MICRO_VERSION);
      printf("*** library (version %d.%d.%d)\n",
	     glib_major_version, glib_minor_version, glib_micro_version);
    }
  else
    {
      if ((glib_major_version > major) ||
        ((glib_major_version == major) && (glib_minor_version > minor)) ||
        ((glib_major_version == major) && (glib_minor_version == minor) && (glib_micro_version >= micro)))
      {
        return 0;
       }
     else
      {
        printf("\n*** An old version of GLIB (%d.%d.%d) was found.\n",
               glib_major_version, glib_minor_version, glib_micro_version);
        printf("*** You need a version of GLIB newer than %d.%d.%d. The latest version of\n",
	       major, minor, micro);
        printf("*** GLIB is always available from ftp://ftp.gtk.org.\n");
        printf("***\n");
        printf("*** If you have already installed a sufficiently new version, this error\n");
        printf("*** probably means that the wrong copy of the glib-config shell script is\n");
        printf("*** being found. The easiest way to fix this is to remove the old version\n");
        printf("*** of GLIB, but you can also set the GLIB_CONFIG environment to point to the\n");
        printf("*** correct copy of glib-config. (In this case, you will have to\n");
        printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n");
        printf("*** so that the correct libraries are found at run-time))\n");
      }
    }
  return 1;
}

EOF
if { (eval echo configure:2778: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  :
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  no_glib=yes
fi
rm -fr conftest*
fi

       CFLAGS="$ac_save_CFLAGS"
       LIBS="$ac_save_LIBS"
     fi
  fi
  if test "x$no_glib" = x ; then
     echo "$ac_t""yes" 1>&6
     :     
  else
     echo "$ac_t""no" 1>&6
     if test "$GLIB_CONFIG" = "no" ; then
       echo "*** The glib-config script installed by GLIB could not be found"
       echo "*** If GLIB was installed in PREFIX, make sure PREFIX/bin is in"
       echo "*** your path, or set the GLIB_CONFIG environment variable to the"
       echo "*** full path to glib-config."
     else
       if test -f conf.glibtest ; then
        :
       else
          echo "*** Could not run GLIB test program, checking why..."
          CFLAGS="$CFLAGS $GLIB_CFLAGS"
          LIBS="$LIBS $GLIB_LIBS"
          cat > conftest.$ac_ext <<EOF
#line 2812 "configure"
#include "confdefs.h"

#include <glib.h>
#include <stdio.h>

int main() {
 return ((glib_major_version) || (glib_minor_version) || (glib_micro_version)); 
; return 0; }
EOF
if { (eval echo configure:2822: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
   echo "*** The test program compiled, but did not run. This usually means"
          echo "*** that the run-time linker is not finding GLIB or finding the wrong"
          echo "*** version of GLIB. If it is not finding GLIB, you'll need to set your"
          echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
          echo "*** to the installed location  Also, make sure you have run ldconfig if that"
          echo "*** is required on your system"
	  echo "***"
          echo "*** If you have an old version installed, it is best to remove it, although"
          echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"
          echo "***"
          echo "*** If you have a RedHat 5.0 system, you should remove the GTK package that"
          echo "*** came with the system with the command"
          echo "***"
          echo "***    rpm --erase --nodeps gtk gtk-devel" 
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
   echo "*** The test program failed to compile or link. See the file config.log for the"
          echo "*** exact error that occured. This usually means GLIB was incorrectly installed"
          echo "*** or that you have moved GLIB since it was installed. In the latter case, you"
          echo "*** may want to edit the glib-config script: $GLIB_CONFIG" 
fi
rm -f conftest*
          CFLAGS="$ac_save_CFLAGS"
          LIBS="$ac_save_LIBS"
       fi
     fi
     GLIB_CFLAGS=""
     GLIB_LIBS=""
     :
  fi
  
  
  rm -f conf.glibtest

  if test -z "$GLIB_LIBS"; then
    echo "*** trying without -lgmodule"
    glib_config_args=
    # Check whether --with-glib-prefix or --without-glib-prefix was given.
if test "${with_glib_prefix+set}" = set; then
  withval="$with_glib_prefix"
  glib_config_prefix="$withval"
else
  glib_config_prefix=""
fi

# Check whether --with-glib-exec-prefix or --without-glib-exec-prefix was given.
if test "${with_glib_exec_prefix+set}" = set; then
  withval="$with_glib_exec_prefix"
  glib_config_exec_prefix="$withval"
else
  glib_config_exec_prefix=""
fi

# Check whether --enable-glibtest or --disable-glibtest was given.
if test "${enable_glibtest+set}" = set; then
  enableval="$enable_glibtest"
  :
else
  enable_glibtest=yes
fi


  if test x$glib_config_exec_prefix != x ; then
     glib_config_args="$glib_config_args --exec-prefix=$glib_config_exec_prefix"
     if test x${GLIB_CONFIG+set} != xset ; then
        GLIB_CONFIG=$glib_config_exec_prefix/bin/glib-config
     fi
  fi
  if test x$glib_config_prefix != x ; then
     glib_config_args="$glib_config_args --prefix=$glib_config_prefix"
     if test x${GLIB_CONFIG+set} != xset ; then
        GLIB_CONFIG=$glib_config_prefix/bin/glib-config
     fi
  fi

  for module in . 
  do
      case "$module" in
         gmodule) 
             glib_config_args="$glib_config_args gmodule"
         ;;
         gthread) 
             glib_config_args="$glib_config_args gthread"
         ;;
      esac
  done

  # Extract the first word of "glib-config", so it can be a program name with args.
set dummy glib-config; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:2916: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GLIB_CONFIG'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  case "$GLIB_CONFIG" in
  /*)
  ac_cv_path_GLIB_CONFIG="$GLIB_CONFIG" # Let the user override the test with a path.
  ;;
  ?:/*)			 
  ac_cv_path_GLIB_CONFIG="$GLIB_CONFIG" # Let the user override the test with a dos path.
  ;;
  *)
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do 
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_path_GLIB_CONFIG="$ac_dir/$ac_word"
      break
    fi
  done
  IFS="$ac_save_ifs"
  test -z "$ac_cv_path_GLIB_CONFIG" && ac_cv_path_GLIB_CONFIG="no"
  ;;
esac
fi
GLIB_CONFIG="$ac_cv_path_GLIB_CONFIG"
if test -n "$GLIB_CONFIG"; then
  echo "$ac_t""$GLIB_CONFIG" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

  min_glib_version=1.2.0
  echo $ac_n "checking for GLIB - version >= $min_glib_version""... $ac_c" 1>&6
echo "configure:2951: checking for GLIB - version >= $min_glib_version" >&5
  no_glib=""
  if test "$GLIB_CONFIG" = "no" ; then
    no_glib=yes
  else
    GLIB_CFLAGS=`$GLIB_CONFIG $glib_config_args --cflags`
    GLIB_LIBS=`$GLIB_CONFIG $glib_config_args --libs`
    glib_config_major_version=`$GLIB_CONFIG $glib_config_args --version | \
           sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\1/'`
    glib_config_minor_version=`$GLIB_CONFIG $glib_config_args --version | \
           sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\2/'`
    glib_config_micro_version=`$GLIB_CONFIG $glib_config_args --version | \
           sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\3/'`
    if test "x$enable_glibtest" = "xyes" ; then
      ac_save_CFLAGS="$CFLAGS"
      ac_save_LIBS="$LIBS"
      CFLAGS="$CFLAGS $GLIB_CFLAGS"
      LIBS="$GLIB_LIBS $LIBS"
      rm -f conf.glibtest
      if test "$cross_compiling" = yes; then
  echo $ac_n "cross compiling; assumed OK... $ac_c"
else
  cat > conftest.$ac_ext <<EOF
#line 2974 "configure"
#include "confdefs.h"

#include <glib.h>
#include <stdio.h>
#include <stdlib.h>

int 
main ()
{
  int major, minor, micro;
  char *tmp_version;

  system ("touch conf.glibtest");

  /* HP/UX 9 (%@#!) writes to sscanf strings */
  tmp_version = g_strdup("$min_glib_version");
  if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, &micro) != 3) {
     printf("%s, bad version string\n", "$min_glib_version");
     exit(1);
   }

  if ((glib_major_version != $glib_config_major_version) ||
      (glib_minor_version != $glib_config_minor_version) ||
      (glib_micro_version != $glib_config_micro_version))
    {
      printf("\n*** 'glib-config --version' returned %d.%d.%d, but GLIB (%d.%d.%d)\n", 
             $glib_config_major_version, $glib_config_minor_version, $glib_config_micro_version,
             glib_major_version, glib_minor_version, glib_micro_version);
      printf ("*** was found! If glib-config was correct, then it is best\n");
      printf ("*** to remove the old version of GLIB. You may also be able to fix the error\n");
      printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n");
      printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n");
      printf("*** required on your system.\n");
      printf("*** If glib-config was wrong, set the environment variable GLIB_CONFIG\n");
      printf("*** to point to the correct copy of glib-config, and remove the file config.cache\n");
      printf("*** before re-running configure\n");
    } 
  else if ((glib_major_version != GLIB_MAJOR_VERSION) ||
	   (glib_minor_version != GLIB_MINOR_VERSION) ||
           (glib_micro_version != GLIB_MICRO_VERSION))
    {
      printf("*** GLIB header files (version %d.%d.%d) do not match\n",
	     GLIB_MAJOR_VERSION, GLIB_MINOR_VERSION, GLIB_MICRO_VERSION);
      printf("*** library (version %d.%d.%d)\n",
	     glib_major_version, glib_minor_version, glib_micro_version);
    }
  else
    {
      if ((glib_major_version > major) ||
        ((glib_major_version == major) && (glib_minor_version > minor)) ||
        ((glib_major_version == major) && (glib_minor_version == minor) && (glib_micro_version >= micro)))
      {
        return 0;
       }
     else
      {
        printf("\n*** An old version of GLIB (%d.%d.%d) was found.\n",
               glib_major_version, glib_minor_version, glib_micro_version);
        printf("*** You need a version of GLIB newer than %d.%d.%d. The latest version of\n",
	       major, minor, micro);
        printf("*** GLIB is always available from ftp://ftp.gtk.org.\n");
        printf("***\n");
        printf("*** If you have already installed a sufficiently new version, this error\n");
        printf("*** probably means that the wrong copy of the glib-config shell script is\n");
        printf("*** being found. The easiest way to fix this is to remove the old version\n");
        printf("*** of GLIB, but you can also set the GLIB_CONFIG environment to point to the\n");
        printf("*** correct copy of glib-config. (In this case, you will have to\n");
        printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n");
        printf("*** so that the correct libraries are found at run-time))\n");
      }
    }
  return 1;
}

EOF
if { (eval echo configure:3050: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  :
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  no_glib=yes
fi
rm -fr conftest*
fi

       CFLAGS="$ac_save_CFLAGS"
       LIBS="$ac_save_LIBS"
     fi
  fi
  if test "x$no_glib" = x ; then
     echo "$ac_t""yes" 1>&6
     :     
  else
     echo "$ac_t""no" 1>&6
     if test "$GLIB_CONFIG" = "no" ; then
       echo "*** The glib-config script installed by GLIB could not be found"
       echo "*** If GLIB was installed in PREFIX, make sure PREFIX/bin is in"
       echo "*** your path, or set the GLIB_CONFIG environment variable to the"
       echo "*** full path to glib-config."
     else
       if test -f conf.glibtest ; then
        :
       else
          echo "*** Could not run GLIB test program, checking why..."
          CFLAGS="$CFLAGS $GLIB_CFLAGS"
          LIBS="$LIBS $GLIB_LIBS"
          cat > conftest.$ac_ext <<EOF
#line 3084 "configure"
#include "confdefs.h"

#include <glib.h>
#include <stdio.h>

int main() {
 return ((glib_major_version) || (glib_minor_version) || (glib_micro_version)); 
; return 0; }
EOF
if { (eval echo configure:3094: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
   echo "*** The test program compiled, but did not run. This usually means"
          echo "*** that the run-time linker is not finding GLIB or finding the wrong"
          echo "*** version of GLIB. If it is not finding GLIB, you'll need to set your"
          echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
          echo "*** to the installed location  Also, make sure you have run ldconfig if that"
          echo "*** is required on your system"
	  echo "***"
          echo "*** If you have an old version installed, it is best to remove it, although"
          echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"
          echo "***"
          echo "*** If you have a RedHat 5.0 system, you should remove the GTK package that"
          echo "*** came with the system with the command"
          echo "***"
          echo "***    rpm --erase --nodeps gtk gtk-devel" 
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
   echo "*** The test program failed to compile or link. See the file config.log for the"
          echo "*** exact error that occured. This usually means GLIB was incorrectly installed"
          echo "*** or that you have moved GLIB since it was installed. In the latter case, you"
          echo "*** may want to edit the glib-config script: $GLIB_CONFIG" 
fi
rm -f conftest*
          CFLAGS="$ac_save_CFLAGS"
          LIBS="$ac_save_LIBS"
       fi
     fi
     GLIB_CFLAGS=""
     GLIB_LIBS=""
     :
  fi
  
  
  rm -f conf.glibtest

  else
    cat >> confdefs.h <<\EOF
#define HAVE_GMODULE 1
EOF

    have_gmodule=yes
  fi

  if test -z "$GLIB_LIBS"; then
    echo
    echo "*** If you don't have GLIB, you can get it from ftp://ftp.gtk.org"
    echo "*** If you can't install GLIB anywhere or if you don't want to,"
    echo "*** you can just unpack it to Irssi's source directory and"
    echo "*** Irssi will automatically compile and use it."
    echo

                    glib_file=glib-1.2.10.tar.gz

    dlcmd=
    if test -n "`ncftpget 2>/dev/null|grep -i ncftp`"; then
      dlcmd="ncftpget ftp://ftp.gtk.org/pub/gtk/v1.2/$glib_file"
    fi
    if test -n "`wget 2>/dev/null|grep -i wget`"; then
      dlcmd="wget http://irssi.org/files/$glib_file"
    fi
    if test -n "$dlcmd"; then
      echo "*** I can download GLib for you now. If you don't want to, press CTRL-C now."
      echo
      echo "*** Press ENTER to continue"
      read answer
      eval $dlcmd
      if `gunzip $glib_file`; then
	glib_file=`echo $glib_file|$sedpath s/\.gz$//`
	if `tar xf $glib_file`; then
	  rm -f $glib_file
	  
  echo $ac_n "checking whether GLib is unpacked to irssi dir""... $ac_c" 1>&6
echo "configure:3169: checking whether GLib is unpacked to irssi dir" >&5

  GLIB_DIR=`for d in *; do test -f $d/glib.h && echo $d; done`
  if test -n "$GLIB_DIR"; then
        echo "$ac_t""yes, using it" 1>&6

        if test ! -f $GLIB_DIR/.libs/libglib.a; then
      echo
      echo "configuring GLib ..."
      echo
      cd $GLIB_DIR
      if test ! -f glib-config; then
        ./configure
      fi
      ${MAKE-make}
      cd ..
      echo
    fi

    GLIB_LDEXTRA=`$GLIB_DIR/glib-config --libs gmodule|$sedpath -e 's/-lglib//' -e 's/-lgmodule//' -e 's,-L/usr/local/lib ,,'|$sedpath 's/ \+/ /g'`
    full_glib_dir="`pwd`/$GLIB_DIR"
    GLIB_CFLAGS="-I$full_glib_dir -I$full_glib_dir/gmodule"
    if test -f $full_glib_dir/.libs/libglib.a; then
      GLIB_LIBS="$full_glib_dir/.libs/libglib.a $GLIB_LDEXTRA"
      if test -f $full_glib_dir/gmodule/.libs/libgmodule.a; then
	GLIB_LIBS="$GLIB_LIBS $full_glib_dir/gmodule/.libs/libgmodule.a"
        cat >> confdefs.h <<\EOF
#define HAVE_GMODULE 1
EOF

	have_gmodule=yes
      fi
    else
      GLIB_LIBS="$full_glib_dir/libglib.a $GLIB_LDEXTRA"
      if test -f $full_glib_dir/gmodule/libgmodule.a; then
	GLIB_LIBS="$GLIB_LIBS $full_glib_dir/gmodule/libgmodule.a"
        cat >> confdefs.h <<\EOF
#define HAVE_GMODULE 1
EOF

	have_gmodule=yes
      fi
    fi
    
    
  else
    echo "$ac_t""no" 1>&6
  fi

	fi
      fi
    fi

    if test -z "$GLIB_LIBS"; then
      { echo "configure: error: GLIB is required to build irssi." 1>&2; exit 1; }
    fi
  fi
fi

LIBS="$LIBS $GLIB_LIBS"


echo $ac_n "checking if we can link dynamic libraries with modules""... $ac_c" 1>&6
echo "configure:3232: checking if we can link dynamic libraries with modules" >&5
DYNLIB_MODULES=no

cat > conftest.c <<EOF
#include <math.h>
int modfunc(){return (int)floor(1.2);}
EOF

./libtool --mode=compile $CC $CFLAGS -c conftest.c 2> /dev/null > /dev/null
if test ! -s conftest.lo; then
  { echo "configure: error: error compiling test module" 1>&2; exit 1; }
fi

./libtool --mode=link $CC $CFLAGS $LDFLAGS -rpath /usr/lib conftest.lo -lm -o libconftest.la > /dev/null
if test ! -s .libs/libconftest.a; then
  { echo "configure: error: error, can't even find .a library" 1>&2; exit 1; }
fi

libfile=`grep '^library_names' libconftest.la|$sedpath "s/library_names='\(.*\)'.*/\1/"|$sedpath 's/.* \([^ ]*\)$/\1/'`
if test ! -s .libs/$libfile; then
  echo "$ac_t""no, error linking test module" 1>&6
else
  cat > conftest.c <<EOF
#include <gmodule.h>
main() {
GModule *m; int (*modfunc)(void);
m = g_module_open(".libs/$libfile", 0);
if (!m) g_print("error loading: %s", g_module_error());
else if (!g_module_symbol(m, "modfunc", (gpointer *) &modfunc))
  g_print("modfunc() symbol not found from module");
else if (modfunc() == 1) g_print("ok"); else g_print("wrong result?! 1 vs %d", modfunc());
return 0; }
EOF
  $CC $CFLAGS $LDFLAGS conftest.c -o conftest $GLIB_CFLAGS $GLIB_LIBS 2> /dev/null > /dev/null
  if test ! -s conftest; then
    echo "$ac_t""no, error compiling test program" 1>&6
  else
    status="`./conftest`"
    if test "x$status" = "xok"; then
      DYNLIB_MODULES=yes
      echo "$ac_t""yes" 1>&6
    else
      echo "$ac_t""no, error running: $status" 1>&6
    fi
  fi
fi
rm -rf conftest conftest.* libconftest.* .libs


if test "x$want_textui" = "xyes"; then
	
	search_ncurses=true
	screen_manager=""
	has_curses=false

	CFLAGS=${CFLAGS--O}

	
	

	# Check whether --with-sco or --without-sco was given.
if test "${with_sco+set}" = set; then
  withval="$with_sco"
  
	  if test x$withval = xyes; then
		cat >> confdefs.h <<\EOF
#define SCO_FLAVOR 1
EOF

		CFLAGS="$CFLAGS -D_SVID3"
	  fi
	
fi


	# Check whether --with-sunos-curses or --without-sunos-curses was given.
if test "${with_sunos_curses+set}" = set; then
  withval="$with_sunos_curses"
  
	  if test x$withval = xyes; then
		
	search_ncurses=false
	screen_manager="SunOS 4.x /usr/5include curses"
	echo "$ac_t""Using SunOS 4.x /usr/5include curses" 1>&6
	cat >> confdefs.h <<\EOF
#define USE_SUNOS_CURSES 1
EOF

	cat >> confdefs.h <<\EOF
#define HAS_CURSES 1
EOF

	has_curses=true
	cat >> confdefs.h <<\EOF
#define NO_COLOR_CURSES 1
EOF

	cat >> confdefs.h <<\EOF
#define USE_SYSV_CURSES 1
EOF

	CURSES_INCLUDEDIR="-I/usr/5include"
	CURSES_LIBS="/usr/5lib/libcurses.a /usr/5lib/libtermcap.a"
	echo "$ac_t""Please note that some screen refreshs may fail" 1>&6

	  fi
	
fi


	# Check whether --with-osf1-curses or --without-osf1-curses was given.
if test "${with_osf1_curses+set}" = set; then
  withval="$with_osf1_curses"
  
	  if test x$withval = xyes; then
		
       echo "$ac_t""Using OSF1 curses" 1>&6
       search_ncurses=false
       screen_manager="OSF1 curses"
       cat >> confdefs.h <<\EOF
#define HAS_CURSES 1
EOF

       has_curses=true
       cat >> confdefs.h <<\EOF
#define NO_COLOR_CURSES 1
EOF

       cat >> confdefs.h <<\EOF
#define USE_SYSV_CURSES 1
EOF

       CURSES_LIBS="-lcurses"

	  fi
	
fi


	# Check whether --with-vcurses or --without-vcurses was given.
if test "${with_vcurses+set}" = set; then
  withval="$with_vcurses"
  if test x$withval != xyes; then
		CURSES_INCLUDEDIR="-I$withval"
	  fi
	  
	echo "$ac_t""Using SysV curses" 1>&6
	cat >> confdefs.h <<\EOF
#define HAS_CURSES 1
EOF

	has_curses=true
	cat >> confdefs.h <<\EOF
#define USE_SYSV_CURSES 1
EOF

	search_ncurses=false
	screen_manager="SysV/curses"
	CURSES_LIBS="-lcurses"

	
fi


	# Check whether --with-ncurses or --without-ncurses was given.
if test "${with_ncurses+set}" = set; then
  withval="$with_ncurses"
  if test x$withval = xno ; then
		search_ncurses=false
	  elif test x$withval != xyes ; then
		
    if $search_ncurses
    then
        if test -f $withval/include/ncurses.h
	then
	    echo "$ac_t""Found ncurses on $withval/include/ncurses.h" 1>&6

	    CURSES_LIBS="-L$withval/lib -lncurses"
	    echo $ac_n "checking for initscr in -lncurses""... $ac_c" 1>&6
echo "configure:3411: checking for initscr in -lncurses" >&5
ac_lib_var=`echo ncurses'_'initscr | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lncurses $CURSES_LIBS $LIBS"
cat > conftest.$ac_ext <<EOF
#line 3419 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char initscr();

int main() {
initscr()
; return 0; }
EOF
if { (eval echo configure:3430: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  
	        true;
	    
else
  echo "$ac_t""no" 1>&6

                CHECKLIBS=`echo "-L$withval/lib -lncurses"|sed 's/-lncurses/-lcurses/g'`
		echo $ac_n "checking for initscr in -lcurses""... $ac_c" 1>&6
echo "configure:3453: checking for initscr in -lcurses" >&5
ac_lib_var=`echo curses'_'initscr | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lcurses $CHECKLIBS $LIBS"
cat > conftest.$ac_ext <<EOF
#line 3461 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char initscr();

int main() {
initscr()
; return 0; }
EOF
if { (eval echo configure:3472: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  
			CURSES_LIBS="$CHECKLIBS"
		
else
  echo "$ac_t""no" 1>&6
fi

	    
fi

	    CURSES_INCLUDEDIR="-I$withval/include"
	    search_ncurses=false
	    screen_manager="ncurses on $withval/include"
            cat >> confdefs.h <<\EOF
#define HAS_CURSES 1
EOF

            has_curses=true
	    has_ncurses=true
	    cat >> confdefs.h <<\EOF
#define USE_NCURSES 1
EOF

	fi
    fi

	  fi
	
fi


	if $search_ncurses
	then
		
    echo "checking "location of ncurses.h file"" 1>&6
echo "configure:3522: checking "location of ncurses.h file"" >&5

    
    if $search_ncurses
    then
        if test -f /usr/include/ncurses.h
	then
	    echo "$ac_t""Found ncurses on /usr/include/ncurses.h" 1>&6

	    CURSES_LIBS="-lncurses"
	    echo $ac_n "checking for initscr in -lncurses""... $ac_c" 1>&6
echo "configure:3533: checking for initscr in -lncurses" >&5
ac_lib_var=`echo ncurses'_'initscr | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lncurses $CURSES_LIBS $LIBS"
cat > conftest.$ac_ext <<EOF
#line 3541 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char initscr();

int main() {
initscr()
; return 0; }
EOF
if { (eval echo configure:3552: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  
	        true;
	    
else
  echo "$ac_t""no" 1>&6

                CHECKLIBS=`echo "-lncurses"|sed 's/-lncurses/-lcurses/g'`
		echo $ac_n "checking for initscr in -lcurses""... $ac_c" 1>&6
echo "configure:3575: checking for initscr in -lcurses" >&5
ac_lib_var=`echo curses'_'initscr | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lcurses $CHECKLIBS $LIBS"
cat > conftest.$ac_ext <<EOF
#line 3583 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char initscr();

int main() {
initscr()
; return 0; }
EOF
if { (eval echo configure:3594: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  
			CURSES_LIBS="$CHECKLIBS"
		
else
  echo "$ac_t""no" 1>&6
fi

	    
fi

	    CURSES_INCLUDEDIR=""
	    search_ncurses=false
	    screen_manager="ncurses on /usr/include"
            cat >> confdefs.h <<\EOF
#define HAS_CURSES 1
EOF

            has_curses=true
	    has_ncurses=true
	    cat >> confdefs.h <<\EOF
#define USE_NCURSES 1
EOF

	fi
    fi

    
    if $search_ncurses
    then
        if test -f /usr/include/ncurses/ncurses.h
	then
	    echo "$ac_t""Found ncurses on /usr/include/ncurses/ncurses.h" 1>&6

	    CURSES_LIBS="-lncurses"
	    echo $ac_n "checking for initscr in -lncurses""... $ac_c" 1>&6
echo "configure:3644: checking for initscr in -lncurses" >&5
ac_lib_var=`echo ncurses'_'initscr | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lncurses $CURSES_LIBS $LIBS"
cat > conftest.$ac_ext <<EOF
#line 3652 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char initscr();

int main() {
initscr()
; return 0; }
EOF
if { (eval echo configure:3663: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  
	        true;
	    
else
  echo "$ac_t""no" 1>&6

                CHECKLIBS=`echo "-lncurses"|sed 's/-lncurses/-lcurses/g'`
		echo $ac_n "checking for initscr in -lcurses""... $ac_c" 1>&6
echo "configure:3686: checking for initscr in -lcurses" >&5
ac_lib_var=`echo curses'_'initscr | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lcurses $CHECKLIBS $LIBS"
cat > conftest.$ac_ext <<EOF
#line 3694 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char initscr();

int main() {
initscr()
; return 0; }
EOF
if { (eval echo configure:3705: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  
			CURSES_LIBS="$CHECKLIBS"
		
else
  echo "$ac_t""no" 1>&6
fi

	    
fi

	    CURSES_INCLUDEDIR="-I/usr/include/ncurses"
	    search_ncurses=false
	    screen_manager="ncurses on /usr/include/ncurses"
            cat >> confdefs.h <<\EOF
#define HAS_CURSES 1
EOF

            has_curses=true
	    has_ncurses=true
	    cat >> confdefs.h <<\EOF
#define USE_NCURSES 1
EOF

	fi
    fi

    
    if $search_ncurses
    then
        if test -f /usr/local/include/ncurses.h
	then
	    echo "$ac_t""Found ncurses on /usr/local/include/ncurses.h" 1>&6

	    CURSES_LIBS="-L/usr/local/lib -lncurses"
	    echo $ac_n "checking for initscr in -lncurses""... $ac_c" 1>&6
echo "configure:3755: checking for initscr in -lncurses" >&5
ac_lib_var=`echo ncurses'_'initscr | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lncurses $CURSES_LIBS $LIBS"
cat > conftest.$ac_ext <<EOF
#line 3763 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char initscr();

int main() {
initscr()
; return 0; }
EOF
if { (eval echo configure:3774: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  
	        true;
	    
else
  echo "$ac_t""no" 1>&6

                CHECKLIBS=`echo "-L/usr/local/lib -lncurses"|sed 's/-lncurses/-lcurses/g'`
		echo $ac_n "checking for initscr in -lcurses""... $ac_c" 1>&6
echo "configure:3797: checking for initscr in -lcurses" >&5
ac_lib_var=`echo curses'_'initscr | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lcurses $CHECKLIBS $LIBS"
cat > conftest.$ac_ext <<EOF
#line 3805 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char initscr();

int main() {
initscr()
; return 0; }
EOF
if { (eval echo configure:3816: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  
			CURSES_LIBS="$CHECKLIBS"
		
else
  echo "$ac_t""no" 1>&6
fi

	    
fi

	    CURSES_INCLUDEDIR="-I/usr/local/include"
	    search_ncurses=false
	    screen_manager="ncurses on /usr/local"
            cat >> confdefs.h <<\EOF
#define HAS_CURSES 1
EOF

            has_curses=true
	    has_ncurses=true
	    cat >> confdefs.h <<\EOF
#define USE_NCURSES 1
EOF

	fi
    fi

    
    if $search_ncurses
    then
        if test -f /usr/pkg/include/ncurses.h
	then
	    echo "$ac_t""Found ncurses on /usr/pkg/include/ncurses.h" 1>&6

	    CURSES_LIBS="-L/usr/pkg/lib -lncurses"
	    echo $ac_n "checking for initscr in -lncurses""... $ac_c" 1>&6
echo "configure:3866: checking for initscr in -lncurses" >&5
ac_lib_var=`echo ncurses'_'initscr | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lncurses $CURSES_LIBS $LIBS"
cat > conftest.$ac_ext <<EOF
#line 3874 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char initscr();

int main() {
initscr()
; return 0; }
EOF
if { (eval echo configure:3885: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  
	        true;
	    
else
  echo "$ac_t""no" 1>&6

                CHECKLIBS=`echo "-L/usr/pkg/lib -lncurses"|sed 's/-lncurses/-lcurses/g'`
		echo $ac_n "checking for initscr in -lcurses""... $ac_c" 1>&6
echo "configure:3908: checking for initscr in -lcurses" >&5
ac_lib_var=`echo curses'_'initscr | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lcurses $CHECKLIBS $LIBS"
cat > conftest.$ac_ext <<EOF
#line 3916 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char initscr();

int main() {
initscr()
; return 0; }
EOF
if { (eval echo configure:3927: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  
			CURSES_LIBS="$CHECKLIBS"
		
else
  echo "$ac_t""no" 1>&6
fi

	    
fi

	    CURSES_INCLUDEDIR="-I/usr/pkg/include"
	    search_ncurses=false
	    screen_manager="ncurses on /usr/pkg"
            cat >> confdefs.h <<\EOF
#define HAS_CURSES 1
EOF

            has_curses=true
	    has_ncurses=true
	    cat >> confdefs.h <<\EOF
#define USE_NCURSES 1
EOF

	fi
    fi

    
    if $search_ncurses
    then
        if test -f /usr/contrib/include/ncurses.h
	then
	    echo "$ac_t""Found ncurses on /usr/contrib/include/ncurses.h" 1>&6

	    CURSES_LIBS="-L/usr/contrib/lib -lncurses"
	    echo $ac_n "checking for initscr in -lncurses""... $ac_c" 1>&6
echo "configure:3977: checking for initscr in -lncurses" >&5
ac_lib_var=`echo ncurses'_'initscr | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lncurses $CURSES_LIBS $LIBS"
cat > conftest.$ac_ext <<EOF
#line 3985 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char initscr();

int main() {
initscr()
; return 0; }
EOF
if { (eval echo configure:3996: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  
	        true;
	    
else
  echo "$ac_t""no" 1>&6

                CHECKLIBS=`echo "-L/usr/contrib/lib -lncurses"|sed 's/-lncurses/-lcurses/g'`
		echo $ac_n "checking for initscr in -lcurses""... $ac_c" 1>&6
echo "configure:4019: checking for initscr in -lcurses" >&5
ac_lib_var=`echo curses'_'initscr | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lcurses $CHECKLIBS $LIBS"
cat > conftest.$ac_ext <<EOF
#line 4027 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char initscr();

int main() {
initscr()
; return 0; }
EOF
if { (eval echo configure:4038: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  
			CURSES_LIBS="$CHECKLIBS"
		
else
  echo "$ac_t""no" 1>&6
fi

	    
fi

	    CURSES_INCLUDEDIR="-I/usr/contrib/include"
	    search_ncurses=false
	    screen_manager="ncurses on /usr/contrib"
            cat >> confdefs.h <<\EOF
#define HAS_CURSES 1
EOF

            has_curses=true
	    has_ncurses=true
	    cat >> confdefs.h <<\EOF
#define USE_NCURSES 1
EOF

	fi
    fi

    
    if $search_ncurses
    then
        if test -f /usr/local/include/ncurses/ncurses.h
	then
	    echo "$ac_t""Found ncurses on /usr/local/include/ncurses/ncurses.h" 1>&6

	    CURSES_LIBS="-L/usr/local/lib -L/usr/local/lib/ncurses -lncurses"
	    echo $ac_n "checking for initscr in -lncurses""... $ac_c" 1>&6
echo "configure:4088: checking for initscr in -lncurses" >&5
ac_lib_var=`echo ncurses'_'initscr | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lncurses $CURSES_LIBS $LIBS"
cat > conftest.$ac_ext <<EOF
#line 4096 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char initscr();

int main() {
initscr()
; return 0; }
EOF
if { (eval echo configure:4107: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  
	        true;
	    
else
  echo "$ac_t""no" 1>&6

                CHECKLIBS=`echo "-L/usr/local/lib -L/usr/local/lib/ncurses -lncurses"|sed 's/-lncurses/-lcurses/g'`
		echo $ac_n "checking for initscr in -lcurses""... $ac_c" 1>&6
echo "configure:4130: checking for initscr in -lcurses" >&5
ac_lib_var=`echo curses'_'initscr | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lcurses $CHECKLIBS $LIBS"
cat > conftest.$ac_ext <<EOF
#line 4138 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char initscr();

int main() {
initscr()
; return 0; }
EOF
if { (eval echo configure:4149: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  
			CURSES_LIBS="$CHECKLIBS"
		
else
  echo "$ac_t""no" 1>&6
fi

	    
fi

	    CURSES_INCLUDEDIR="-I/usr/local/include/ncurses"
	    search_ncurses=false
	    screen_manager="ncurses on /usr/local/include/ncurses"
            cat >> confdefs.h <<\EOF
#define HAS_CURSES 1
EOF

            has_curses=true
	    has_ncurses=true
	    cat >> confdefs.h <<\EOF
#define USE_NCURSES 1
EOF

	fi
    fi


    
    if $search_ncurses
    then
        if test -f /usr/local/include/ncurses/curses.h
	then
	    echo "$ac_t""Found ncurses on /usr/local/include/ncurses/curses.h" 1>&6

	    CURSES_LIBS="-L/usr/local/lib -lncurses"
	    echo $ac_n "checking for initscr in -lncurses""... $ac_c" 1>&6
echo "configure:4200: checking for initscr in -lncurses" >&5
ac_lib_var=`echo ncurses'_'initscr | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lncurses $CURSES_LIBS $LIBS"
cat > conftest.$ac_ext <<EOF
#line 4208 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char initscr();

int main() {
initscr()
; return 0; }
EOF
if { (eval echo configure:4219: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  
	        true;
	    
else
  echo "$ac_t""no" 1>&6

                CHECKLIBS=`echo "-L/usr/local/lib -lncurses"|sed 's/-lncurses/-lcurses/g'`
		echo $ac_n "checking for initscr in -lcurses""... $ac_c" 1>&6
echo "configure:4242: checking for initscr in -lcurses" >&5
ac_lib_var=`echo curses'_'initscr | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lcurses $CHECKLIBS $LIBS"
cat > conftest.$ac_ext <<EOF
#line 4250 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char initscr();

int main() {
initscr()
; return 0; }
EOF
if { (eval echo configure:4261: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  
			CURSES_LIBS="$CHECKLIBS"
		
else
  echo "$ac_t""no" 1>&6
fi

	    
fi

	    CURSES_INCLUDEDIR="-I/usr/local/include/ncurses -DRENAMED_NCURSES"
	    search_ncurses=false
	    screen_manager="renamed ncurses on /usr/local/.../ncurses"
            cat >> confdefs.h <<\EOF
#define HAS_CURSES 1
EOF

            has_curses=true
	    has_ncurses=true
	    cat >> confdefs.h <<\EOF
#define USE_NCURSES 1
EOF

	fi
    fi


    
    if $search_ncurses
    then
        if test -f /usr/include/ncurses/curses.h
	then
	    echo "$ac_t""Found ncurses on /usr/include/ncurses/curses.h" 1>&6

	    CURSES_LIBS="-lncurses"
	    echo $ac_n "checking for initscr in -lncurses""... $ac_c" 1>&6
echo "configure:4312: checking for initscr in -lncurses" >&5
ac_lib_var=`echo ncurses'_'initscr | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lncurses $CURSES_LIBS $LIBS"
cat > conftest.$ac_ext <<EOF
#line 4320 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char initscr();

int main() {
initscr()
; return 0; }
EOF
if { (eval echo configure:4331: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  
	        true;
	    
else
  echo "$ac_t""no" 1>&6

                CHECKLIBS=`echo "-lncurses"|sed 's/-lncurses/-lcurses/g'`
		echo $ac_n "checking for initscr in -lcurses""... $ac_c" 1>&6
echo "configure:4354: checking for initscr in -lcurses" >&5
ac_lib_var=`echo curses'_'initscr | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lcurses $CHECKLIBS $LIBS"
cat > conftest.$ac_ext <<EOF
#line 4362 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char initscr();

int main() {
initscr()
; return 0; }
EOF
if { (eval echo configure:4373: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  
			CURSES_LIBS="$CHECKLIBS"
		
else
  echo "$ac_t""no" 1>&6
fi

	    
fi

	    CURSES_INCLUDEDIR="-I/usr/include/ncurses -DRENAMED_NCURSES"
	    search_ncurses=false
	    screen_manager="renamed ncurses on /usr/include/ncurses"
            cat >> confdefs.h <<\EOF
#define HAS_CURSES 1
EOF

            has_curses=true
	    has_ncurses=true
	    cat >> confdefs.h <<\EOF
#define USE_NCURSES 1
EOF

	fi
    fi


                if $search_ncurses 
    then
        cat > conftest.$ac_ext <<EOF
#line 4418 "configure"
#include "confdefs.h"
#include </usr/include/curses.h>
EOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
  egrep "init_color" >/dev/null 2>&1; then
  rm -rf conftest*
  
	echo "$ac_t""Using SysV curses" 1>&6
	cat >> confdefs.h <<\EOF
#define HAS_CURSES 1
EOF

	has_curses=true
	cat >> confdefs.h <<\EOF
#define USE_SYSV_CURSES 1
EOF

	search_ncurses=false
	screen_manager="SysV/curses"
	CURSES_LIBS="-lcurses"

fi
rm -f conftest*

	cat > conftest.$ac_ext <<EOF
#line 4444 "configure"
#include "confdefs.h"

#include <curses.h>
#ifdef __NCURSES_H
#undef USE_NCURSES
USE_NCURSES
#endif

EOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
  egrep "USE_NCURSES" >/dev/null 2>&1; then
  rm -rf conftest*
  
	CURSES_INCLUDEDIR="$CURSES_INCLUDEDIR -DRENAMED_NCURSES"
        cat >> confdefs.h <<\EOF
#define HAS_CURSES 1
EOF

	has_curses=true
	has_ncurses=true
        cat >> confdefs.h <<\EOF
#define USE_NCURSES 1
EOF

        search_ncurses=false
        screen_manager="ncurses installed as curses"

fi
rm -f conftest*

    fi

                        if $search_ncurses
    then
	if test -f /usr/5include/curses.h
	then
	    
	search_ncurses=false
	screen_manager="SunOS 4.x /usr/5include curses"
	echo "$ac_t""Using SunOS 4.x /usr/5include curses" 1>&6
	cat >> confdefs.h <<\EOF
#define USE_SUNOS_CURSES 1
EOF

	cat >> confdefs.h <<\EOF
#define HAS_CURSES 1
EOF

	has_curses=true
	cat >> confdefs.h <<\EOF
#define NO_COLOR_CURSES 1
EOF

	cat >> confdefs.h <<\EOF
#define USE_SYSV_CURSES 1
EOF

	CURSES_INCLUDEDIR="-I/usr/5include"
	CURSES_LIBS="/usr/5lib/libcurses.a /usr/5lib/libtermcap.a"
	echo "$ac_t""Please note that some screen refreshs may fail" 1>&6

        fi
    fi

        if $search_ncurses
    then
	if test -f /usr/include/curses.h
	then
	  CURSES_LIBS="-lcurses"
	  cat >> confdefs.h <<\EOF
#define HAS_CURSES 1
EOF

	  has_curses=true
	  search_ncurses=false
	  screen_manager="curses"
	fi
    fi

	fi


	LIBS="$LIBS $CURSES_LIBS"
	if test "x$has_curses" = "xtrue"; then
       		echo $ac_n "checking for use_default_colors""... $ac_c" 1>&6
echo "configure:4530: checking for use_default_colors" >&5
if eval "test \"`echo '$''{'ac_cv_func_use_default_colors'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 4535 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char use_default_colors(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char use_default_colors();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_use_default_colors) || defined (__stub___use_default_colors)
choke me
#else
use_default_colors();
#endif

; return 0; }
EOF
if { (eval echo configure:4558: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_use_default_colors=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_use_default_colors=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'use_default_colors`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  cat >> confdefs.h <<\EOF
#define HAVE_NCURSES_USE_DEFAULT_COLORS 1
EOF

else
  echo "$ac_t""no" 1>&6
fi

       		echo $ac_n "checking for idcok""... $ac_c" 1>&6
echo "configure:4581: checking for idcok" >&5
if eval "test \"`echo '$''{'ac_cv_func_idcok'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 4586 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char idcok(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char idcok();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_idcok) || defined (__stub___idcok)
choke me
#else
idcok();
#endif

; return 0; }
EOF
if { (eval echo configure:4609: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_idcok=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_idcok=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'idcok`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  cat >> confdefs.h <<\EOF
#define HAVE_CURSES_IDCOK 1
EOF

else
  echo "$ac_t""no" 1>&6
fi

       		echo $ac_n "checking for resizeterm""... $ac_c" 1>&6
echo "configure:4632: checking for resizeterm" >&5
if eval "test \"`echo '$''{'ac_cv_func_resizeterm'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 4637 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char resizeterm(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char resizeterm();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_resizeterm) || defined (__stub___resizeterm)
choke me
#else
resizeterm();
#endif

; return 0; }
EOF
if { (eval echo configure:4660: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_resizeterm=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_resizeterm=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'resizeterm`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  cat >> confdefs.h <<\EOF
#define HAVE_CURSES_RESIZETERM 1
EOF

else
  echo "$ac_t""no" 1>&6
fi

       		echo $ac_n "checking for wresize""... $ac_c" 1>&6
echo "configure:4683: checking for wresize" >&5
if eval "test \"`echo '$''{'ac_cv_func_wresize'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 4688 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char wresize(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char wresize();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_wresize) || defined (__stub___wresize)
choke me
#else
wresize();
#endif

; return 0; }
EOF
if { (eval echo configure:4711: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_wresize=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_wresize=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'wresize`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  cat >> confdefs.h <<\EOF
#define HAVE_CURSES_WRESIZE 1
EOF

else
  echo "$ac_t""no" 1>&6
fi

		echo $ac_n "checking for setupterm""... $ac_c" 1>&6
echo "configure:4734: checking for setupterm" >&5
if eval "test \"`echo '$''{'ac_cv_func_setupterm'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 4739 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char setupterm(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char setupterm();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_setupterm) || defined (__stub___setupterm)
choke me
#else
setupterm();
#endif

; return 0; }
EOF
if { (eval echo configure:4762: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_setupterm=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_setupterm=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'setupterm`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  :
else
  echo "$ac_t""no" 1>&6

		       	want_termcap=yes
		
fi

	else
		echo $ac_n "checking for setupterm in -ltinfo""... $ac_c" 1>&6
echo "configure:4786: checking for setupterm in -ltinfo" >&5
ac_lib_var=`echo tinfo'_'setupterm | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-ltinfo  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 4794 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char setupterm();

int main() {
setupterm()
; return 0; }
EOF
if { (eval echo configure:4805: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  
		  LIBS="$LIBS -ltinfo"
		  want_terminfo=yes
		
else
  echo "$ac_t""no" 1>&6
echo $ac_n "checking for tgetent in -ltermlib""... $ac_c" 1>&6
echo "configure:4827: checking for tgetent in -ltermlib" >&5
ac_lib_var=`echo termlib'_'tgetent | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-ltermlib  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 4835 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char tgetent();

int main() {
tgetent()
; return 0; }
EOF
if { (eval echo configure:4846: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  
		  LIBS="$LIBS -ltermlib"
		  want_termcap=yes
		
else
  echo "$ac_t""no" 1>&6
echo $ac_n "checking for tgetent in -ltermcap""... $ac_c" 1>&6
echo "configure:4868: checking for tgetent in -ltermcap" >&5
ac_lib_var=`echo termcap'_'tgetent | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-ltermcap  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 4876 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char tgetent();

int main() {
tgetent()
; return 0; }
EOF
if { (eval echo configure:4887: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  
		  LIBS="$LIBS -ltermcap"
		  want_termcap=yes
		
else
  echo "$ac_t""no" 1>&6

		  echo "configure: warning: Terminfo/termcap not found" 1>&2
		  want_textui=no
		  curses_error=yes
		
fi

fi

fi

        fi
       	if test "x$want_termcap" = "xyes"; then
       		echo $ac_n "checking for tparm""... $ac_c" 1>&6
echo "configure:4922: checking for tparm" >&5
if eval "test \"`echo '$''{'ac_cv_func_tparm'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 4927 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char tparm(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char tparm();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_tparm) || defined (__stub___tparm)
choke me
#else
tparm();
#endif

; return 0; }
EOF
if { (eval echo configure:4950: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_tparm=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_tparm=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'tparm`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  :
else
  echo "$ac_t""no" 1>&6
need_tparm=yes
fi

	else
		cat >> confdefs.h <<\EOF
#define HAVE_TERMINFO 1
EOF

       	fi
fi


if test "$want_perl" != "no"; then
	echo $ac_n "checking for working Perl support""... $ac_c" 1>&6
echo "configure:4981: checking for working Perl support" >&5

	if test -z "$perlpath"; then
       		perl_check_error="perl binary not found"
	else
		PERL_CFLAGS=`$perlpath -MExtUtils::Embed -e ccopts 2>/dev/null`
	fi

	if test -z "$PERL_CFLAGS"; then
		if test -n "$perl_check_error"; then
			perl_check_error="Error getting perl CFLAGS"
		fi
		echo "$ac_t""not found, building without Perl" 1>&6
		want_perl=no
	else
		PERL_LDFLAGS=`$perlpath -MExtUtils::Embed -e ldopts 2>/dev/null`

						have_pl_perl=`$perlpath -e 'print $] < 5.005 ? "no" : "yes";'`
                if test "x$have_pl_perl" = "xyes"; then
			cat >> confdefs.h <<\EOF
#define HAVE_PL_PERL 1
EOF

		fi

		if test "x$DYNLIB_MODULES" = "xno" -a "$want_perl" != "static"; then
						want_perl=static
			perl_mod_error="Dynamic library dependencies don't work with modules"
		fi

		if test "$want_perl" != "static"; then
						DYNALOADER_A=`echo $PERL_LDFLAGS | $perlpath -pe 's/^(.* )*([^ ]*DynaLoader\.a).*/\2/'`
		fi

				if test -n "$DYNALOADER_A"; then
						LIBPERL_A=`echo "$PERL_LDFLAGS -L/usr/lib"|$perlpath -e 'foreach (split(/ /, <STDIN>)) { if (/^-L(.*)/) { my $dir=$1; if (\`ls $dir/libperl.so* 2>/dev/null\`) { print "-lperl"; last; }; if (-e "$dir/libperl.a") { print "$dir/libperl.a"; last } } };'`
			if test -z "$LIBPERL_A"; then
				perl_mod_error="Didn't find location of -lperl"
				DYNALOADER_A=
			elif test "$LIBPERL_A" = "-lperl"; then
				LIBPERL_A=
			fi
		fi

										for word in -ldb -ldbm -lndbm -lgdbm -lc -rdynamic; do
		  PERL_LDFLAGS=`echo $PERL_LDFLAGS | $sedpath -e "s/$word //" -e "s/$word$//"`
		done

		case "$host_os" in
		  linux*)
		    PERL_LDFLAGS=`echo $PERL_LDFLAGS | $sedpath -e 's/-lposix //' -e 's/-lposix$//'`
		    ;;
		  hpux*)
		    if test "x$ac_cv_prog_gcc" = "xyes"; then
		      PERL_CFLAGS=`echo $PERL_CFLAGS | $sedpath -e 's/-Ae //' -e 's/-Ae$//'`
		      PERL_LDFLAGS=`echo $PERL_LDFLAGS | $sedpath -e 's/-Ae //' -e 's/-Ae$//'`
		    fi
		    ;;
		  *)
		    ;;
		esac

				if eval "test \"`echo '$''{'irssi_cv_lib_perl_works'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  
			echo "main(){perl_alloc(); return 0;}" > conftest.c
			$CC $CFLAGS conftest.c -o conftest $LDFLAGS $PERL_LDFLAGS 2> perl.error.tmp > /dev/null
			if test -s conftest; then
				irssi_cv_lib_perl_works=yes
			else
				irssi_cv_lib_perl_works=no
			fi
		
fi


		if test "x$irssi_cv_lib_perl_works" = "xno"; then
			perl_check_error="Error linking with perl libraries: $PERL_LDFLAGS: `cat perl.error.tmp`"
			echo "$ac_t""error linking with perl libraries, building without Perl" 1>&6
			want_perl=no
		fi
		rm -f perl.error.tmp
	fi

	if test "x$want_perl" != "xno"; then
		if test "x$want_perl" = "xstatic"; then
			echo "$ac_t""ok" 1>&6
		elif test -z "$DYNALOADER_A"; then
			echo "$ac_t""error parsing ldopts, building Perl into irssi binary instead of as module" 1>&6
			want_perl=static
		else
			echo "$ac_t""ok" 1>&6
			PERL_LDFLAGS=`echo $PERL_LDFLAGS | $perlpath -pe 's/^(.* )*[^ ]*DynaLoader\.a/\1libperl_dynaloader.la/'`
			if test -n "$LIBPERL_A"; then
				PERL_LDFLAGS=`echo $PERL_LDFLAGS | $sedpath -e 's/-lperl /libperl_orig.la /' -e 's/-lperl$/libperl_orig.la$/'`
			fi
			
			
		fi

		if test "x$want_perl" = "xstatic"; then
									PERL_LINK_FLAGS="$PERL_LDFLAGS"
			PERL_LINK_LIBS="../perl/libperl_core_static.la"
			PERL_FE_LINK_LIBS="../perl/libfe_perl_static.la"
			PERL_LDFLAGS=
			cat >> confdefs.h <<\EOF
#define HAVE_STATIC_PERL 1
EOF


						perl_module_lib=
			perl_module_fe_lib=
			perl_static_lib=libperl_core_static.la
			perl_static_fe_lib=libfe_perl_static.la
			PERL_LIBTOOL='$(SHELL) $(top_builddir)/libtool'
		else
						perl_module_lib=libperl_core.la
			perl_module_fe_lib=libfe_perl.la
			perl_static_lib=
			perl_static_fe_lib=
			PERL_LIBTOOL='$(SHELL) $(top_builddir)/libtool'
		fi

		if test "x$want_staticperllib" = "xyes"; then
			PERL_MM_PARAMS="$PERL_MM_PARAMS LINKTYPE=static"
			PERL_LINK_LIBS="$PERL_LINK_LIBS ../perl/common/blib/arch/auto/Irssi/Irssi.a ../perl/irc/blib/arch/auto/Irssi/Irc/Irc.a ../perl/ui/blib/arch/auto/Irssi/UI/UI.a ../perl/textui/blib/arch/auto/Irssi/TextUI/TextUI.a"
			PERL_STATIC_LIBS=1
		else
			PERL_STATIC_LIBS=0
		fi

		# figure out the correct @INC path - we'll need to do this
		# through MakeMaker since it's difficult to get it right
		# otherwise.
		if test "x$perl_set_use_lib" = "xyes"; then
			perl -e 'use ExtUtils::MakeMaker; WriteMakefile("NAME" => "test", "MAKEFILE" => "Makefile.test");' $PERL_MM_PARAMS >/dev/null
			PERL_USE_LIB=`perl -e 'open(F, "Makefile.test"); while (<F>) { chomp; if (/^(\w+) = (.*$)/) { $keys{$1} = $2; } }; $key = $keys{INSTALLARCHLIB}; while ($key =~ /\\$\((\w+)\)/) { $value = $keys{$1}; $key =~ s/\\$\($1\)/$value/; }; print $key;'`
			rm -f Makefile.test
		fi

		
		
		
		
		

		
		
                

		
		

		
		
		
	fi
fi



if test "$want_textui" = "yes"; then
  BUILD_TEXTUI_TRUE=
  BUILD_TEXTUI_FALSE='#'
else
  BUILD_TEXTUI_TRUE='#'
  BUILD_TEXTUI_FALSE=
fi


if test "$want_irssibot" = "yes"; then
  BUILD_IRSSIBOT_TRUE=
  BUILD_IRSSIBOT_FALSE='#'
else
  BUILD_IRSSIBOT_TRUE='#'
  BUILD_IRSSIBOT_FALSE=
fi


if test "$want_irssiproxy" = "yes"; then
  BUILD_IRSSIPROXY_TRUE=
  BUILD_IRSSIPROXY_FALSE='#'
else
  BUILD_IRSSIPROXY_TRUE='#'
  BUILD_IRSSIPROXY_FALSE=
fi


if test "$want_plugins" = "yes"; then
  BUILD_PLUGINS_TRUE=
  BUILD_PLUGINS_FALSE='#'
else
  BUILD_PLUGINS_TRUE='#'
  BUILD_PLUGINS_FALSE=
fi


if test -n "$TEST_DIR"; then
  BUILD_SERVERTEST_TRUE=
  BUILD_SERVERTEST_FALSE='#'
else
  BUILD_SERVERTEST_TRUE='#'
  BUILD_SERVERTEST_FALSE=
fi


if test "$want_perl" != "no"; then
  HAVE_PERL_TRUE=
  HAVE_PERL_FALSE='#'
else
  HAVE_PERL_TRUE='#'
  HAVE_PERL_FALSE=
fi


if test "$want_perl" = "static"; then
  HAVE_STATIC_PERL_TRUE=
  HAVE_STATIC_PERL_FALSE='#'
else
  HAVE_STATIC_PERL_TRUE='#'
  HAVE_STATIC_PERL_FALSE=
fi


if test "$need_tparm" = "yes"; then
  NEED_TPARM_TRUE=
  NEED_TPARM_FALSE='#'
else
  NEED_TPARM_TRUE='#'
  NEED_TPARM_FALSE=
fi


if test "$want_terminfo" != "yes" -a "$want_termcap" != "yes"; then
  USE_CURSES_TRUE=
  USE_CURSES_FALSE='#'
else
  USE_CURSES_TRUE='#'
  USE_CURSES_FALSE=
fi

# move LIBS to PROG_LIBS so they're not tried to be used when linking eg. perl libraries
PROG_LIBS=$LIBS
LIBS=



CHAT_MODULES="irc"
irc_MODULES="dcc flood notifylist"
if test -n "$build_modules"; then
	irc_MODULES="$irc_MODULES $build_modules"
fi





CORE_LIBS="../core/libcore.a ../lib-config/libirssi_config.a ../lib-popt/libpopt.a"
FE_COMMON_LIBS=""

CHAT_LIBS=""
for c in $CHAT_MODULES; do
	module_inits=""
	module_deinits=""
	fe_module_inits=""
	fe_module_deinits=""
	CHAT_LIBS="$CHAT_LIBS ../$c/lib$c.a ../$c/core/lib${c}_core.a"
	if test -f $srcdir/src/fe-common/$c/module.h; then
		FE_COMMON_LIBS="$FE_COMMON_LIBS../fe-common/$c/libfe_common_$c.a "
	fi
	for s in `eval echo \\$${c}_MODULES`; do
		CHAT_LIBS="$CHAT_LIBS ../$c/$s/lib${c}_$s.a"
		module_inits="$module_inits ${c}_${s}_init();"
		module_deinits="${c}_${s}_deinit(); $module_deinits"
		if test -f $srcdir/src/fe-common/$c/$s/module.h; then
			FE_COMMON_LIBS="$FE_COMMON_LIBS../fe-common/$c/$s/libfe_${c}_$s.a "
			fe_module_inits="$fe_module_inits fe_${c}_${s}_init();"
			fe_module_deinits="fe_${c}_${s}_deinit(); $fe_module_deinits"
		fi
	done

	file="$srcdir/src/$c/$c.c"
        echo "/* this file is automatically generated by configure - don't change */" > $file
	echo "void ${c}_core_init(void); void ${c}_core_deinit(void);" >> $file
	if test -n "$module_inits"; then
        	echo "$module_inits" | $sedpath -e 's/()/(void)/g' -e 's/ /void /g' >> $file
        	echo "$module_deinits" | $sedpath -e 's/ *$//' -e 's/()/(void)/g' -e 's/ /void /g' -e 's/^/void /' >> $file
	fi
        echo "void ${c}_init(void) { ${c}_core_init(); $module_inits }" >> $file
        echo "void ${c}_deinit(void) { $module_deinits ${c}_core_deinit(); }" >> $file

	if test -f $srcdir/src/fe-common/$c/module.h; then
	        file="$srcdir/src/fe-common/$c/${c}-modules.c"
	        echo "/* this file is automatically generated by configure - don't change */" > $file
                if test -n "$fe_module_inits"; then
		        echo "$fe_module_inits" | $sedpath -e 's/()/(void)/g' -e 's/ /void /g' >> $file
		        echo "$fe_module_deinits" | $sedpath -e 's/ *$//' -e 's/()/(void)/g' -e 's/ /void /g' -e 's/^/void /' >> $file
		fi
	        echo "void fe_${c}_modules_init(void) { $fe_module_inits }" >> $file
	        echo "void fe_${c}_modules_deinit(void) { $fe_module_deinits }" >> $file
	fi
done

FE_COMMON_LIBS="$FE_COMMON_LIBS../fe-common/core/libfe_common_core.a"

COMMON_NOUI_LIBS="$CHAT_LIBS $CORE_LIBS"
COMMON_LIBS="$FE_COMMON_LIBS $COMMON_NOUI_LIBS"




if test "x$want_ipv6" = "xyes"; then
	echo $ac_n "checking for IPv6""... $ac_c" 1>&6
echo "configure:5295: checking for IPv6" >&5
	if eval "test \"`echo '$''{'irssi_cv_type_in6_addr'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 5300 "configure"
#include "confdefs.h"

	#include <sys/types.h>
	#include <sys/socket.h>
	#include <netinet/in.h>
	#include <netdb.h>
	#include <arpa/inet.h>
int main() {
struct in6_addr i;
; return 0; }
EOF
if { (eval echo configure:5312: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  irssi_cv_type_in6_addr=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  irssi_cv_type_in6_addr=no
fi
rm -f conftest*
fi

	if test $irssi_cv_type_in6_addr = yes; then
		cat >> confdefs.h <<\EOF
#define HAVE_IPV6 1
EOF

	fi
	echo "$ac_t""$irssi_cv_type_in6_addr" 1>&6
fi

VERSION_DATE=`head -1 $srcdir/ChangeLog|sed 's/^\(....\)-\(..\)-\(..\).*/\1\2\3/'`
VERSION_TIME=`head -1 $srcdir/ChangeLog|sed -e 's/^[^ ]* \(..\):\(..\).*/\1\2/' -e 's/^0*//'`



trap '' 1 2 15
cat > confcache <<\EOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
# scripts and configure runs.  It is not useful on other systems.
# If it contains results you don't want to keep, you may remove or edit it.
#
# By default, configure uses ./config.cache as the cache file,
# creating it if it does not exist already.  You can give configure
# the --cache-file=FILE option to use a different cache file; that is
# what configure does when it calls configure scripts in
# subdirectories, so they share the cache.
# Giving --cache-file=/dev/null disables caching, for debugging configure.
# config.status only pays attention to the cache file if you give it the
# --recheck option to rerun configure.
#
EOF
# The following way of writing the cache mishandles newlines in values,
# but we know of no workaround that is simple, portable, and efficient.
# So, don't put newlines in cache variables' values.
# Ultrix sh set writes to stderr and can't be redirected directly,
# and sets the high bit in the cache file unless we assign to the vars.
(set) 2>&1 |
  case `(ac_space=' '; set | grep ac_space) 2>&1` in
  *ac_space=\ *)
    # `set' does not quote correctly, so add quotes (double-quote substitution
    # turns \\\\ into \\, and sed turns \\ into \).
    sed -n \
      -e "s/'/'\\\\''/g" \
      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
    ;;
  *)
    # `set' quotes correctly as required by POSIX, so do not add quotes.
    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
    ;;
  esac >> confcache
if cmp -s $cache_file confcache; then
  :
else
  if test -w $cache_file; then
    echo "updating cache $cache_file"
    cat confcache > $cache_file
  else
    echo "not updating unwritable cache $cache_file"
  fi
fi
rm -f confcache

trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15

test "x$prefix" = xNONE && prefix=$ac_default_prefix
# Let make expand exec_prefix.
test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'

# Any assignment to VPATH causes Sun make to only execute
# the first set of double-colon rules, so remove it if not needed.
# If there is a colon in the path, we need to keep it.
if test "x$srcdir" = x.; then
  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
fi

trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15

DEFS=-DHAVE_CONFIG_H

# Without the "./", some shells look in PATH for config.status.
: ${CONFIG_STATUS=./config.status}

echo creating $CONFIG_STATUS
rm -f $CONFIG_STATUS
cat > $CONFIG_STATUS <<EOF
#! /bin/sh
# Generated automatically by configure.
# Run this file to recreate the current configuration.
# This directory was configured as follows,
# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
#
# $0 $ac_configure_args
#
# Compiler output produced by configure, useful for debugging
# configure, is in ./config.log if it exists.

ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
for ac_option
do
  case "\$ac_option" in
  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
    echo "$CONFIG_STATUS generated by autoconf version 2.13"
    exit 0 ;;
  -help | --help | --hel | --he | --h)
    echo "\$ac_cs_usage"; exit 0 ;;
  *) echo "\$ac_cs_usage"; exit 1 ;;
  esac
done

ac_given_srcdir=$srcdir
ac_given_INSTALL="$INSTALL"

trap 'rm -fr `echo "Makefile
src/Makefile
src/core/Makefile
src/irc/Makefile
src/irc/core/Makefile
src/irc/bot/Makefile
src/irc/dcc/Makefile
src/irc/notifylist/Makefile
src/irc/proxy/Makefile
src/irc/flood/Makefile
src/fe-common/Makefile
src/fe-common/core/Makefile
src/fe-common/irc/Makefile
src/fe-common/irc/dcc/Makefile
src/fe-common/irc/notifylist/Makefile
src/fe-none/Makefile
src/fe-text/Makefile
src/lib-config/Makefile
src/lib-popt/Makefile
src/perl/Makefile
src/perl/common/Makefile.PL
src/perl/irc/Makefile.PL
src/perl/ui/Makefile.PL
src/perl/textui/Makefile.PL
servertest/Makefile
scripts/Makefile
scripts/examples/Makefile
docs/Makefile
docs/help/Makefile
docs/help/in/Makefile
irssi-version.h
stamp.h
irssi.spec
irssi-config config.h" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
EOF
cat >> $CONFIG_STATUS <<EOF

# Protect against being on the right side of a sed subst in config.status.
sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
 s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
$ac_vpsub
$extrasub
s%@SHELL@%$SHELL%g
s%@CFLAGS@%$CFLAGS%g
s%@CPPFLAGS@%$CPPFLAGS%g
s%@CXXFLAGS@%$CXXFLAGS%g
s%@FFLAGS@%$FFLAGS%g
s%@DEFS@%$DEFS%g
s%@LDFLAGS@%$LDFLAGS%g
s%@LIBS@%$LIBS%g
s%@exec_prefix@%$exec_prefix%g
s%@prefix@%$prefix%g
s%@program_transform_name@%$program_transform_name%g
s%@bindir@%$bindir%g
s%@sbindir@%$sbindir%g
s%@libexecdir@%$libexecdir%g
s%@datadir@%$datadir%g
s%@sysconfdir@%$sysconfdir%g
s%@sharedstatedir@%$sharedstatedir%g
s%@localstatedir@%$localstatedir%g
s%@libdir@%$libdir%g
s%@includedir@%$includedir%g
s%@oldincludedir@%$oldincludedir%g
s%@infodir@%$infodir%g
s%@mandir@%$mandir%g
s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
s%@INSTALL_DATA@%$INSTALL_DATA%g
s%@PACKAGE@%$PACKAGE%g
s%@VERSION@%$VERSION%g
s%@ACLOCAL@%$ACLOCAL%g
s%@AUTOCONF@%$AUTOCONF%g
s%@AUTOMAKE@%$AUTOMAKE%g
s%@AUTOHEADER@%$AUTOHEADER%g
s%@MAKEINFO@%$MAKEINFO%g
s%@SET_MAKE@%$SET_MAKE%g
s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
s%@MAINT@%$MAINT%g
s%@CC@%$CC%g
s%@CPP@%$CPP%g
s%@host@%$host%g
s%@host_alias@%$host_alias%g
s%@host_cpu@%$host_cpu%g
s%@host_vendor@%$host_vendor%g
s%@host_os@%$host_os%g
s%@build@%$build%g
s%@build_alias@%$build_alias%g
s%@build_cpu@%$build_cpu%g
s%@build_vendor@%$build_vendor%g
s%@build_os@%$build_os%g
s%@RANLIB@%$RANLIB%g
s%@LN_S@%$LN_S%g
s%@LIBTOOL@%$LIBTOOL%g
s%@sedpath@%$sedpath%g
s%@perlpath@%$perlpath%g
s%@TEST_DIR@%$TEST_DIR%g
s%@GLIB_CFLAGS@%$GLIB_CFLAGS%g
s%@GLIB_LIBS@%$GLIB_LIBS%g
s%@GLIB_CONFIG@%$GLIB_CONFIG%g
s%@CURSES_LIBS@%$CURSES_LIBS%g
s%@CURSES_INCLUDEDIR@%$CURSES_INCLUDEDIR%g
s%@LIBPERL_A@%$LIBPERL_A%g
s%@DYNALOADER_A@%$DYNALOADER_A%g
s%@perl_module_lib@%$perl_module_lib%g
s%@perl_static_lib@%$perl_static_lib%g
s%@perl_module_fe_lib@%$perl_module_fe_lib%g
s%@perl_static_fe_lib@%$perl_static_fe_lib%g
s%@PERL_LIBTOOL@%$PERL_LIBTOOL%g
s%@PERL_LINK_FLAGS@%$PERL_LINK_FLAGS%g
s%@PERL_LINK_LIBS@%$PERL_LINK_LIBS%g
s%@PERL_FE_LINK_LIBS@%$PERL_FE_LINK_LIBS%g
s%@PERL_LDFLAGS@%$PERL_LDFLAGS%g
s%@PERL_CFLAGS@%$PERL_CFLAGS%g
s%@PERL_USE_LIB@%$PERL_USE_LIB%g
s%@PERL_MM_PARAMS@%$PERL_MM_PARAMS%g
s%@PERL_STATIC_LIBS@%$PERL_STATIC_LIBS%g
s%@BUILD_TEXTUI_TRUE@%$BUILD_TEXTUI_TRUE%g
s%@BUILD_TEXTUI_FALSE@%$BUILD_TEXTUI_FALSE%g
s%@BUILD_IRSSIBOT_TRUE@%$BUILD_IRSSIBOT_TRUE%g
s%@BUILD_IRSSIBOT_FALSE@%$BUILD_IRSSIBOT_FALSE%g
s%@BUILD_IRSSIPROXY_TRUE@%$BUILD_IRSSIPROXY_TRUE%g
s%@BUILD_IRSSIPROXY_FALSE@%$BUILD_IRSSIPROXY_FALSE%g
s%@BUILD_PLUGINS_TRUE@%$BUILD_PLUGINS_TRUE%g
s%@BUILD_PLUGINS_FALSE@%$BUILD_PLUGINS_FALSE%g
s%@BUILD_SERVERTEST_TRUE@%$BUILD_SERVERTEST_TRUE%g
s%@BUILD_SERVERTEST_FALSE@%$BUILD_SERVERTEST_FALSE%g
s%@HAVE_PERL_TRUE@%$HAVE_PERL_TRUE%g
s%@HAVE_PERL_FALSE@%$HAVE_PERL_FALSE%g
s%@HAVE_STATIC_PERL_TRUE@%$HAVE_STATIC_PERL_TRUE%g
s%@HAVE_STATIC_PERL_FALSE@%$HAVE_STATIC_PERL_FALSE%g
s%@NEED_TPARM_TRUE@%$NEED_TPARM_TRUE%g
s%@NEED_TPARM_FALSE@%$NEED_TPARM_FALSE%g
s%@USE_CURSES_TRUE@%$USE_CURSES_TRUE%g
s%@USE_CURSES_FALSE@%$USE_CURSES_FALSE%g
s%@PROG_LIBS@%$PROG_LIBS%g
s%@CHAT_MODULES@%$CHAT_MODULES%g
s%@irc_MODULES@%$irc_MODULES%g
s%@COMMON_NOUI_LIBS@%$COMMON_NOUI_LIBS%g
s%@COMMON_LIBS@%$COMMON_LIBS%g
s%@VERSION_DATE@%$VERSION_DATE%g
s%@VERSION_TIME@%$VERSION_TIME%g

CEOF
EOF

cat >> $CONFIG_STATUS <<\EOF

# Split the substitutions into bite-sized pieces for seds with
# small command number limits, like on Digital OSF/1 and HP-UX.
ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
ac_file=1 # Number of current file.
ac_beg=1 # First line for current file.
ac_end=$ac_max_sed_cmds # Line after last line for current file.
ac_more_lines=:
ac_sed_cmds=""
while $ac_more_lines; do
  if test $ac_beg -gt 1; then
    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
  else
    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
  fi
  if test ! -s conftest.s$ac_file; then
    ac_more_lines=false
    rm -f conftest.s$ac_file
  else
    if test -z "$ac_sed_cmds"; then
      ac_sed_cmds="sed -f conftest.s$ac_file"
    else
      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
    fi
    ac_file=`expr $ac_file + 1`
    ac_beg=$ac_end
    ac_end=`expr $ac_end + $ac_max_sed_cmds`
  fi
done
if test -z "$ac_sed_cmds"; then
  ac_sed_cmds=cat
fi
EOF

cat >> $CONFIG_STATUS <<EOF

CONFIG_FILES=\${CONFIG_FILES-"Makefile
src/Makefile
src/core/Makefile
src/irc/Makefile
src/irc/core/Makefile
src/irc/bot/Makefile
src/irc/dcc/Makefile
src/irc/notifylist/Makefile
src/irc/proxy/Makefile
src/irc/flood/Makefile
src/fe-common/Makefile
src/fe-common/core/Makefile
src/fe-common/irc/Makefile
src/fe-common/irc/dcc/Makefile
src/fe-common/irc/notifylist/Makefile
src/fe-none/Makefile
src/fe-text/Makefile
src/lib-config/Makefile
src/lib-popt/Makefile
src/perl/Makefile
src/perl/common/Makefile.PL
src/perl/irc/Makefile.PL
src/perl/ui/Makefile.PL
src/perl/textui/Makefile.PL
servertest/Makefile
scripts/Makefile
scripts/examples/Makefile
docs/Makefile
docs/help/Makefile
docs/help/in/Makefile
irssi-version.h
stamp.h
irssi.spec
irssi-config"}
EOF
cat >> $CONFIG_STATUS <<\EOF
for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
  case "$ac_file" in
  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
  *) ac_file_in="${ac_file}.in" ;;
  esac

  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.

  # Remove last slash and all that follows it.  Not all systems have dirname.
  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
    # The file is in a subdirectory.
    test ! -d "$ac_dir" && mkdir "$ac_dir"
    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
    # A "../" for each directory in $ac_dir_suffix.
    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
  else
    ac_dir_suffix= ac_dots=
  fi

  case "$ac_given_srcdir" in
  .)  srcdir=.
      if test -z "$ac_dots"; then top_srcdir=.
      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
  *) # Relative path.
    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
    top_srcdir="$ac_dots$ac_given_srcdir" ;;
  esac

  case "$ac_given_INSTALL" in
  [/$]*) INSTALL="$ac_given_INSTALL" ;;
  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
  esac

  echo creating "$ac_file"
  rm -f "$ac_file"
  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
  case "$ac_file" in
  *Makefile*) ac_comsub="1i\\
# $configure_input" ;;
  *) ac_comsub= ;;
  esac

  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
  sed -e "$ac_comsub
s%@configure_input@%$configure_input%g
s%@srcdir@%$srcdir%g
s%@top_srcdir@%$top_srcdir%g
s%@INSTALL@%$INSTALL%g
" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
fi; done
rm -f conftest.s*

# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
# NAME is the cpp macro being defined and VALUE is the value it is being given.
#
# ac_d sets the value in "#define NAME VALUE" lines.
ac_dA='s%^\([ 	]*\)#\([ 	]*define[ 	][ 	]*\)'
ac_dB='\([ 	][ 	]*\)[^ 	]*%\1#\2'
ac_dC='\3'
ac_dD='%g'
# ac_u turns "#undef NAME" with trailing blanks into "#define NAME VALUE".
ac_uA='s%^\([ 	]*\)#\([ 	]*\)undef\([ 	][ 	]*\)'
ac_uB='\([ 	]\)%\1#\2define\3'
ac_uC=' '
ac_uD='\4%g'
# ac_e turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
ac_eA='s%^\([ 	]*\)#\([ 	]*\)undef\([ 	][ 	]*\)'
ac_eB='$%\1#\2define\3'
ac_eC=' '
ac_eD='%g'

if test "${CONFIG_HEADERS+set}" != set; then
EOF
cat >> $CONFIG_STATUS <<EOF
  CONFIG_HEADERS="config.h"
EOF
cat >> $CONFIG_STATUS <<\EOF
fi
for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then
  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
  case "$ac_file" in
  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
  *) ac_file_in="${ac_file}.in" ;;
  esac

  echo creating $ac_file

  rm -f conftest.frag conftest.in conftest.out
  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
  cat $ac_file_inputs > conftest.in

EOF

# Transform confdefs.h into a sed script conftest.vals that substitutes
# the proper values into config.h.in to produce config.h.  And first:
# Protect against being on the right side of a sed subst in config.status.
# Protect against being in an unquoted here document in config.status.
rm -f conftest.vals
cat > conftest.hdr <<\EOF
s/[\\&%]/\\&/g
s%[\\$`]%\\&%g
s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD}%gp
s%ac_d%ac_u%gp
s%ac_u%ac_e%gp
EOF
sed -n -f conftest.hdr confdefs.h > conftest.vals
rm -f conftest.hdr

# This sed command replaces #undef with comments.  This is necessary, for
# example, in the case of _POSIX_SOURCE, which is predefined and required
# on some systems where configure will not decide to define it.
cat >> conftest.vals <<\EOF
s%^[ 	]*#[ 	]*undef[ 	][ 	]*[a-zA-Z_][a-zA-Z_0-9]*%/* & */%
EOF

# Break up conftest.vals because some shells have a limit on
# the size of here documents, and old seds have small limits too.

rm -f conftest.tail
while :
do
  ac_lines=`grep -c . conftest.vals`
  # grep -c gives empty output for an empty file on some AIX systems.
  if test -z "$ac_lines" || test "$ac_lines" -eq 0; then break; fi
  # Write a limited-size here document to conftest.frag.
  echo '  cat > conftest.frag <<CEOF' >> $CONFIG_STATUS
  sed ${ac_max_here_lines}q conftest.vals >> $CONFIG_STATUS
  echo 'CEOF
  sed -f conftest.frag conftest.in > conftest.out
  rm -f conftest.in
  mv conftest.out conftest.in
' >> $CONFIG_STATUS
  sed 1,${ac_max_here_lines}d conftest.vals > conftest.tail
  rm -f conftest.vals
  mv conftest.tail conftest.vals
done
rm -f conftest.vals

cat >> $CONFIG_STATUS <<\EOF
  rm -f conftest.frag conftest.h
  echo "/* $ac_file.  Generated automatically by configure.  */" > conftest.h
  cat conftest.in >> conftest.h
  rm -f conftest.in
  if cmp -s $ac_file conftest.h 2>/dev/null; then
    echo "$ac_file is unchanged"
    rm -f conftest.h
  else
    # Remove last slash and all that follows it.  Not all systems have dirname.
      ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
      if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
      # The file is in a subdirectory.
      test ! -d "$ac_dir" && mkdir "$ac_dir"
    fi
    rm -f $ac_file
    mv conftest.h $ac_file
  fi
fi; done

EOF
cat >> $CONFIG_STATUS <<EOF


EOF
cat >> $CONFIG_STATUS <<\EOF
test -z "$CONFIG_HEADERS" || echo timestamp > stamp-h

exit 0
EOF
chmod +x $CONFIG_STATUS
rm -fr confdefs* $ac_clean_files
test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1


old_dir=`pwd` && cd $srcdir && whole_dir=`pwd` && cd $old_dir
if test "x$old_dir" != "x$whole_dir"; then
	$LN_S $srcdir/irssi-version.h irssi-version.h

	if test "x$want_perl" != "xno"; then
		subdirfiles=""
		for i in $whole_dir/src/perl/common $whole_dir/src/perl/irc $whole_dir/src/perl/ui $whole_dir/src/perl/textui; do
			subdirfiles=`echo $subdirfiles $i/typemap $i/module.h $i/*.pm $i/*.xs`
		done
		for file in $whole_dir/src/perl/*.[ch] $whole_dir/src/perl/libperl_orig.la $whole_dir/src/perl/libperl_dynaloader.la $subdirfiles; do
			link=`echo $file|$sedpath "s?$whole_dir/??"`
			rm -f $link
			$LN_S $file $link
		done
	fi
fi

echo

if test "x$curses_error" != "xyes"; then
	if test "x$want_textui" = "xno"; then
		text=no
	elif test "x$want_termcap" = "xyes"; then
		text="yes, using termcap"
	elif test "x$want_terminfo" = "xyes"; then
		text="yes, using terminfo"
	else
		text="yes, using curses"
	fi
	echo "Building text frontend ..... : $text"
else
	echo "Building text frontend ..... : NO!!"
	echo " - Because curses was not found, specify the path to it with"
	echo "   --with-curses=/dir and make sure you have the curses headers"
	echo "   installed (usually in ncurses-devel package)"
fi
echo "Building irssi bot ......... : $want_irssibot"
echo "Building irssi proxy ....... : $want_irssiproxy"
echo "Building with IPv6 support . : $want_ipv6"
if test "x$have_gmodule" = "xyes"; then
	echo "Building with module support : yes"
else
	echo "Building with module support : NO!! /LOAD will not work!"
	echo " - You're missing gmodule (comes with glib) for some reason,"
	echo "   or it doesn't work in your system."
fi

if test "x$want_perl" = "xstatic"; then
	echo "Building with Perl support . : static (in irssi binary)"
elif test "x$want_perl" = "xmodule"; then
	echo "Building with Perl support . : module"
else
	if test -z "$perl_check_error"; then
		echo "Building with Perl support . : no"
	else
		echo "Building with Perl support . : NO!"
		echo " - $perl_check_error"
	fi
fi

if test "x$want_perl" != "xno" -a "x$perl_mod_error" != "x"; then
	echo " - NOTE: Perl support will be compiled statically to irssi, not as"
	echo "   a module as requested. Reason:"
	echo "   $perl_mod_error"
fi

if test "x$want_perl" != "xno"; then
	if test "$perl_library_dir" = "PERL_USE_LIB"; then
		perl_library_dir=$PERL_USE_LIB
	fi
	if test -z "$perl_library_dir"; then
		perl_library_dir="(site default - `$perlpath -e 'use Config; print $Config{sitearch}'`)"
	fi
       	echo "Perl library directory ..... : $perl_library_dir"
	if test "x$perl_prefix_note" = "xyes"; then
		echo "  - NOTE: This was automatically set to the same directory you gave with"
		echo "  --prefix. If you want the perl libraries to install to their 'correct'"
		echo "  path, you'll need to give --with-perl-lib=site option to configure."
		echo "  Anyway, installing perl to this directory should work just as well."
	fi
fi

echo "Install prefix ............. : $prefix"

